Jump to content
SAU Community

Recommended Posts

hey all..

im planing on rebuilding my rb25det to forged internals..

the car see's track time every now and then. so want something that can handle revs etc etc.

i have read throught Nytsky's build thread and also looked at spools website and a couple of others..

now what im not sure on is what parts i need to gather before i send them and the engine off to get built..

i know pistons, rods, bolts, gaskets...

im looking at spool or nitto rods, cp pistons, genuine gasket kit, arp bolts ..

are these good? what else would i need to see my engine to be reliable at the track..

i want to have the rear oil drian.

also looking at the nitto oil pump item..

any work should be done to the head?

should i use nissan bearings or other?

and around the 350rwkw mark and possilbe e85..

and to take some revs :)

i have atm ready to go on, plazmaman plenum, tomei poncams, splitfires, gt3076 .82 with ext gate, nistune ecu, z32, rb26 rocker covers and mines cam baffles, cam gears..

any further info/advice would be good..

Edited by rad32
Link to comment
https://www.sau.com.au/forums/topic/321836-preperation-for-rb25-rebuild/
Share on other sites

was also thinking of doing what my mate did..

specs:

Fully balanced

Arp main studs

Arp head studs

Acl bearings

Acl 1.2mm head gasket

Ross/acl pistons

Argo rods

Adj cam gears

its really all the small stuff like oil restrictors, head porting, harmonic balancers etc..

just want it all safe for the track.

Edited by rad32

ATI or Ross harmonic balancer

Larger sump

Oil feed restrictors x2

Extended oil pump drive

New water pump

If you haven't already you should look into larger radiators and oil coolers for reliability on the track.

that being said if the current engine still works why fix what isnt broken.

yeh i have oil cooler and relo kit and aloy rad..

engine is fine but im looking at slowly starting a collection of parts so when i does come time for a rebuild i have everything here and instead of paying 10k at once ill only have to pay for labour..

If you aren't sure about e85 yet don't buy injectors.

Once you decide what fuel to use, buy them then.

For everything else if you do a search around you'll see it's pretty much all been covered before.

NYTSKY's list would be a good place to start

yeah i have 740cc already...

and yeh his list is good but he wasnt tracking the car from what i could see..

so if there is anything else i would need ontop of his to help with a track scenario..

so my mates engine i posted up, from what i read all i would need to change would be the pistons and rods to a stronger unit for higher revs and add a blancer, sump and oil restrictors..

sound about right?

From my experience you will be pushing shit uphill with that turbo to make that sort of grunt.

Make sure you use good valve springs, Port match everything in your airflow system from the throttle body to the dump.

Balance every rotating part to within an inch of its life. oversize exhaust valves and a decent valve cut.

GL with it mate.

From my experience you will be pushing shit uphill with that turbo to make that sort of grunt.

Make sure you use good valve springs, Port match everything in your airflow system from the throttle body to the dump.

Balance every rotating part to within an inch of its life. oversize exhaust valves and a decent valve cut.

GL with it mate.

Red R are building it Noel, they have already built a couple of RB25's recently that have made this power with that turbocharger on E85 or race fuel.

One of them saw over 3 bar of boost for two laps due to a blown off wastegate hose which would have also ran it very lean and the owner admits to "giving it an absolute caning" with no engine trouble at all.

Im sure it will be quite well built. :cheers: Paul does not cut any corners as he, being a drag racer, is still not aware what a corner even is.

Edited by Red R Racing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...