Jump to content
SAU Community

Recommended Posts

so im reading cars guide in the tele today and there is a small story on a new concept infiniti and the story said the infiniti could be on its way to oz

not keen on the shape but is only a concept car and might change but i like the 3.7ltr twin turbo v8

Link to comment
https://www.sau.com.au/forums/topic/322578-infiniti-to-come-to-oz/
Share on other sites

I heard they were planning to return to Oz in 2013,

due to the popularity of V's that are being imported as well as the fact that Lexus has dominated the market for too long and other companies such as Eunos died miserably in the arse!

I kinda hope they don't.

Aren't imports generally cheaper than australian delivered cars?

If Infiniti comes to Australia, doesn't it mean that we'll have to pay more for our skylines? NOoooooo.... I'm poor

Exactly!! If you look at it logically, the V is spec'd same as a 350Z but with two extra seats, so that means $70k+ back in 03 when the v was launched.

Good news for current V owners as this means our cars wont depreciate that quickly.

If history is anything to go by, it'll be the exact opposite. Aus delivered cars will depreciate like the rest of the market, where as the a$$ will fall out of imports. Have a look at private import cars. People bring thier beemers over from the UK when they move here and depending on the model, I've seen them sell for anything up to 10-15 thousand less than Aus delivered BMW's.

Another example is the Aus GTR, the few that came from Japan are generally selling for at least $10k less.

Exactly!! If you look at it logically, the V is spec'd same as a 350Z but with two extra seats, so that means $70k+ back in 03 when the v was launched.

If history is anything to go by, it'll be the exact opposite. Aus delivered cars will depreciate like the rest of the market, where as the a$$ will fall out of imports. Have a look at private import cars. People bring thier beemers over from the UK when they move here and depending on the model, I've seen them sell for anything up to 10-15 thousand less than Aus delivered BMW's.

Another example is the Aus GTR, the few that came from Japan are generally selling for at least $10k less.

Hmm.. yes you have a point there. I agree if we take a late model V36 for example. If someone bought his V36 a year prior to Nissan bringing in Infiniti, then yes the value of the imported V36 will drop when Infiniti comes to Australia because an Australian delivered model is available. But the arrival of Infiniti will make previous Vs more desirable (hopefully) like the V35. People will start taking notice of Infiniti and the V range (again hopefully)... so I think this will somehow make the V35s hold its value a bit better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...