Jump to content
SAU Community

Recommended Posts

RDO's are to do with being paid on an hourly basis and paid meal breaks etc. I get paid overtime, if I work 4hours overtime I get paid for 4hours. Where as I work for 8hours a day standard shift with .8 of an hour breaks and get paid for 7.2hours a day hence I accrue RDO's at a rate of .8 hours a day...basically means I get paid breaks. For different people it works different ways, it's all about what your EBA says and the shifts that you work.

The question I ask you though is what would you do without tradies? Yes some are slackasses and will be doing basic jobs that earn 50g a year for the rest of their lives but we need those people. There are however alot of highly skilled trades as well that also pay alot more. I am for example an engineer for Qantas, without people doing my job Qantas aircraft would not be allowed to fly. I did an apprentiship, I have spent years learning/studying and still am and thousands on license courses, there's not a whole lot of difference between someone like me and and someone who goes to uni and stuidies and then gets a job, it's just different process of doing it. My brother for example has done HR at uni, 3 days a week, half of that he doesn't even go to, while earning 45g a year at the same time working at coles and now he's finished uni has a fantastic fulltime HR job, nothing bad about that?

The bonuses being offered are a great idea, We need tradies, there's no denying it, if you want more and people aren't doing it you need to give them an incentive, it's as simple as that. Us whinging about it is all people who have recently finished apprentiships and missed out on these incentives, none of us really care we just like whinging because were traides :)

BTW, someone said you were a real estate agent? I'm looking for a place in North Melb or Carlton at the moment, where bouts you work?

Yeah, the RDO system is great, and the sacrifices in your hourly rate don't hurt at all. The shit I do is pretty specialised as well, I have to travel all over the country, working on either conveyor systems, water treatment plants, aswell as beverage lines at brewerys and soft drink makers. Think about that next time you drink a Schweppes beverage, or a Boags Draught :)

RDO's are to do with being paid on an hourly basis and paid meal breaks etc. I get paid overtime, if I work 4hours overtime I get paid for 4hours. Where as I work for 8hours a day standard shift with .8 of an hour breaks and get paid for 7.2hours a day hence I accrue RDO's at a rate of .8 hours a day...basically means I get paid breaks. For different people it works different ways, it's all about what your EBA says and the shifts that you work.

The question I ask you though is what would you do without tradies? Yes some are slackasses and will be doing basic jobs that earn 50g a year for the rest of their lives but we need those people. There are however alot of highly skilled trades as well that also pay alot more. I am for example an engineer for Qantas, without people doing my job Qantas aircraft would not be allowed to fly. I did an apprentiship, I have spent years learning/studying and still am and thousands on license courses, there's not a whole lot of difference between someone like me and and someone who goes to uni and stuidies and then gets a job, it's just different process of doing it. My brother for example has done HR at uni, 3 days a week, half of that he doesn't even go to, while earning 45g a year at the same time working at coles and now he's finished uni has a fantastic fulltime HR job, nothing bad about that?

The bonuses being offered are a great idea, We need tradies, there's no denying it, if you want more and people aren't doing it you need to give them an incentive, it's as simple as that. Us whinging about it is all people who have recently finished apprentiships and missed out on these incentives, none of us really care we just like whinging because were traides :)

BTW, someone said you were a real estate agent? I'm looking for a place in North Melb or Carlton at the moment, where bouts you work?

nah im out west but i can pm u some contacts if you want, i think i know a guy who works in that area. Of course we need tradies now that you explained the RDO system it also makes more sense. I spose its natural my mates will say its for nothign to talk their job up but like u said its accrued.

and i wasnt havin a crack at anyone directly can only go off what my mates tell me who are in the trade.

Yeah, the RDO system is great, and the sacrifices in your hourly rate don't hurt at all. The shit I do is pretty specialised as well, I have to travel all over the country, working on either conveyor systems, water treatment plants, aswell as beverage lines at brewerys and soft drink makers. Think about that next time you drink a Schweppes beverage, or a Boags Draught :)

what do you do? sound the same as my job lol. im an instro technition.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...