Jump to content
SAU Community

Recommended Posts

FitzTech and Cefiro...

The import duty is worked out at 15% of the purchase price of the vehicle NOT including shipping. There are further costs incurred with clearing customs (around $150 at last check) but then GST is worked out on the total: Vehicle purchase price, shipping and the import duty (in other words you are paying a tax on a tax - GTS on import duty... I await the comments on that one!). The easiest way to work out your budget (in my humble but experienced opinion) is to convert the purchase price from yen to AUD (I work it out at around 2 yen below the published rate to allow for fluctuations and bank fees), add 15% to this, add around $2,000 for shipping and customs and quaranteen clearance fees, then add 10% of this total to this total. Also, if you didn't already know, only a RAW can actually apply for an import approval so ensure you have one before the vehicle lands at an Australian port or you will have to re-export or destroy it. Then there are the obligatory compliance costs etc as I assume you already know.

DJ984, different importers have their own policies and I cannot speak for any other than myself but I can assume that most would either pay the taxes etc as they arise with your money (how I started), or just pay them themselves and pass the cost on to you. The only other taxes that most importers / consultants wouldn't cover would be the state government stamp duty which is payable upon first registration or on transfer of ownership. These vary from state to state and currently in SA consist of 4% of either the market value or total cost of the vehicle; whichever is the highest (of course).

well htat sounds better than ive been working out. in other words with the permission from the powers that be, a person can import a car and pay 15% customs, the shipping costs, and then 10% on the total of all of the above(of course there are compliance costs etc but i was more concerned about tarrifs). if this is correct cars can be brought over here alot cheaper than alot of people i know think. if sum1 can correct me or can spot a mistake ive made please correct it as im eager to know the low down on importing

check out prestigemotorsport.com.au they have a calculator to work out costs. But as Garage Menace said don't forget compliance $4,500-$8,000 + say $1000 for tyres +$1000 for rego.

But yes, importing directly can be cheaper...as long as you are confident about the quality of the car you have bought

One point I forgot to mention. Some vehicles of a higher value ($40K I think) attract a luxury car tax in addition to the other charges, however only vehicles like the R34 GTR attract this tax.

It has also been tempting in the past to purchase cars that are modified from Japan but the strictness of the RAWS system is making this virtually impossible. The reason for this is that a vehicle must be returned to a completely standard condition before DoTaRS will issue a compliance plate. The RAW then has to destroy all aftermarket parts (they cannot be sold). DoTaRS are rumoured to be conducting random inspections of shipments arriving at various docks and recording VINs as well as the aftermarket parts installed on the vehicles. When the RAW then submits a VIC (Vehicle Inspection Certificate) to DoTaRS in order to be issued with a compliance plate DoTaRS then asks for photographic evidence of the destruction of all the recorded aftermarket parts. I have had many a sleepless night trying to find a way around this rule (and the senseless destruction of perfectly functional and often extremely expensive aftermarket parts) without success (and after witnessing another RAWS applicant being sodomised by DoTaRS inspectors in the past I have no intention of trying to bend the rules - they have more power than police but are considerably more inconsistant and unpredictable; at least you know cops are going to be...). While this may seem to be off the topic of this thread, it is important to consider that compliance costs may be more expensive than anticipated if the RAW has to purchase OEM parts (they cannot be borrowed either as it is illegal for the RAW to re-install aftermarket parts - or even to supply them to the customer - after attaching the compliance plate) to replace aftermarket parts which came with the vehicle. Also, damaged cars (even damaged and repaired) are totally prohibited from being complied so as Duncan suggested, you must trust whoever is purchasing the vehicle for you in Japan. Otherwise when the RAW refuses to comply a vehicle you have imported you end up with a very expensive mistake as you must either re-export or destroy the vehicle and you cannot just take the vehicle to another RAW. DoTaRS will only issue a compliance plate to the RAW named on the import approval.

If this info has been posted somewhere before... Sorry. Otherwise, good luck.

2 Questions... (sorrie if this has been raised before)

1. If the vehicle in question is a personal import, what kind of duties are imposed(and how much)?

2. As a personal import is the vehicle still subject to compliance rules that that state the vehicle must be stock standard?

Thank you!

That's a good question and one that will require some research before I answer as I have never dealt with personal importing (I am sure someone on these forums will know though). I assume (you know what they say about assuming though) that the import duties would remain the same however the compliance rules are slightly different, but the main advantage is that you can bring in vehicles that are not available under SEVS. Unfortunately though, a couple years ago the Federal Government increased the length of time a person had to own a vehicle at it's country of origin before it could be exported to another country from 3 months to 12 months. To me, not worth it unless you already live in Japan and have owned the vehicle for the required length of time.

I will get back to you with a definitive answer soon.

Cheers all.

Yes, Personal Imports attract the same duties, GST and other costs of importation, but compliance is relaxed.

However, as mentioned, you have to own the vehicle for 12 months first, and this includes:

- living in the same country as the vehicle for 12 months and being able to prove it

- actually driving the car for 12 months and being able to prove it by showing parking receipts, insurance paperwork, servicing receipts with mileage etc, blah blah blah

They are extremely tightarsed and I've had a problem or two with this in the past when importing BMW's from the UK.... It's not fun.

Good luck.

Simon.

  • 9 months later...

So if i bought say an R34 GTR and lived in Japan for a year driving it around and then decided to come back to Australia and bring it with me... could i say i paid $25,000 for it so that i pay less duty and GST and i avoid the luxury tax as well? or will they basically tell me to get ****ed and work it out on market value here?

Cheers,

Andrew

So if i bought say an R34 GTR and lived in Japan for a year driving it around and then decided to come back to Australia and bring it with me... could i say i paid $25,000 for it so that i pay less duty and GST and i avoid the luxury tax as well? or will they basically tell me to get ****ed and work it out on market value here?

Customs would require some sort of proof of what you paid for the car, eg an invoice. But they have various methods of working out the value, see here:

http://www.customs.gov.au/site/page.cfm?u=4371

also take into account that if your car lands in australia AFTER 1st Jan 2005 then you only have to pay 10% duty as per the new rule. But don't expect it to save you a fortune, just enough to fund some intake mods :)

ive got an r32 GTR coming over next month on 15 year rule how much will it cost me at the docks to clear the car and pay for the shipping, gov stamp duty etc geoff from prestige motorsport told me about $5800 but im not sure if the gov. stamp duty etc. is included in the price, ive tried calling him for a few days now but not geting any luck. ive organised SRICAR in melbourne to do the complience and there charging $1000, thats the cheapest place ive come across yet. ive tried using prestige's cost calculator but its to confusing. can any one help me

ive got an r32 GTR coming over next month on 15 year rule how much will it cost me at the docks to clear the car and pay for the shipping, gov stamp duty etc geoff from prestige motorsport told me about $5800 but im not sure if the gov. stamp duty etc. is included in the price, ive tried calling him for a few days now but not geting any luck. ive organised SRICAR in melbourne to do the complience and there charging $1000,  thats the cheapest place ive come across yet. ive tried using prestige's cost calculator but its to confusing. can any one help me

you may have to expand on this a little more,

like if you've payed the FOB price, prestige's service fee, anything else?

providing you know the price you payed for the 32 gtr you should be able to give you an idea.

say you payed about.....$10000 - $12000 (aud) for the GTR then $5800 for govn't tax and stampduity and otherstuff that i carn't remember now sounds about right.

"FOB price + Import broker's service fee + 15% to this, add around $2,000 for shipping and customs and quaranteen clearance fees, then add 10% of this to the total."

above was pretty much a cut and past of Garage Menace's origional post.

Well my initial estimate from prestige was pretty much dead on, up to about $50..

Here is the breakdown I got from customs the other week:

Duty : $979

Freight: $882

Port Service Charges: $155.85

Delivery Order: $45

Quaranteen Fee: $203.50

Quaranteen Attendance: $95

Cartage: $75

Postage & Petties: $12 (their lunch that day :rofl:)

Agency: $150

Documentation: $35

Redline: $45

==

Sub Total: $2678.30

GST: $61.29

Total: $2739

Original FOB price + Agent Fee was $4500 .. so you are paying about 25% of the original purchase price on duty I think in the end.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...