Jump to content
SAU Community

Recommended Posts

Vehicle: 1994 Nissan Skyline

GTS-T MSPEC (series 1) RB25DET

Transmission: Manual

KM: 183, 000

Colour: Burgundy

Location: VIC S/E Car is currently in Blackburn in my garage; however I live in Narre Warren so I will require some notice in order to inspect the car.

Brief Comments: Originally I was looking at selling the car as complete in the upcoming months, however recently I have had a very minor accident and now l’m looking at selling the car as is. Prior to the accident the car was immaculate and only required new windscreen wiper blades for RWC. This was conducted during a very brief inspection last time it was in the shop (fitting my exhaust). Owned by mature owner and the car has never missed a beat. Currently the car starts and drives, however it has a leaking radiator.

Registration: Currently the car is register till FEB 2011 (selling as is, no RWC or REG, happy to discuss arrangement further with buyers)

VIV: NO VIV required, this car is not written off.

Any who is handy with panel beating has a good opportunity to fix this car.

Overview of Damage (pictures below):

Replacement parts required-

Front bar plus re-enforcement bar

Bonnet

Head lights (both, as clips are all broken)

Grill

Radiator, very minor leak but must be changes

Photos are attached of the radiator support panel; this does not need to be changed. Easily repaired!

Impact was done at a very low speed and I included a photo of the black Kia to show what damage I done to her.

List of modifications/ aftermarket parts:

Yellow Jacket Coil packs

Adjustable whiteline caster rod bushes, tie rod ends

New-ish shocks and springs- slightly lower but legal and doesn't scrap everywhere. It was fitted as the original ones no longer have it that tight feeling.

17inch light weight ssr rims (white)- (80% tread all round around Ventus and )

3inch (or 3.5) KatiMoto exhaust with high flow cat. CAT was fixed about 2 months ago

Pod Filter

Viper Alarm with pager

Veil side (legal) steering wheel

Car Condition/ history:

Car is (was) immaculate and I am a really fussy owner. I have owned the car for approximately 3.5yrs and in that time I always ensured the car was running perfectly and never held back on maintenance expenses. The previous owner was the original first owner is Australia and had the car for 3 years. Mechanical you could not fault the car. Car blows no smoke at all and never been boosted. Inspection will not disappoint.

Recently replaced- gear box, diff, Coolant, Engine oil and fitted new EBC green brake pads.

Price (NEG):

With Wheels- $4,500

Without- $3,500

In no hurry to sell as the car is locked up in the garage so no ridiculous offers, however happy to discuss the arrangement (via the phone) with serious customers.

Peter- 0411 588 669

post-48038-1275561561_thumb.jpg

post-48038-1275561642_thumb.jpg

post-48038-1275561705_thumb.jpg

post-48038-1275561809_thumb.jpg

post-48038-1275561878_thumb.jpg

post-48038-1275562037_thumb.jpg

post-48038-1275562131_thumb.jpg

post-48038-1275562207_thumb.jpg

post-48038-1275562391_thumb.jpg

post-48038-1275562508_thumb.jpg

post-48038-1275562587_thumb.jpg

post-48038-1275562734_thumb.jpg

post-48038-1275562899_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/323432-r33-rb25det-manual-m-spec/
Share on other sites

I want the car gone this weekend, otherwise i will be interstate for 2 weeks. I'm not keen on text messages, please call if you are interested.

Reasonable offers only please.

Current price is without reg, but if you can tell me how you are going to transfer the car in your name without a RWC then we can talk further.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...