Jump to content
SAU Community

Swaybars - R33 Gts25t

SoFreshSoClean
 Share

Recommended Posts

SoFreshSoClean Proficient

SoFreshSoClean

Posted
Posted

Just fitted whiteline adjustable swaybars front and rear to my car.. and I've got to say, bang for buck they are absolutely the BEST thing I have done to my car. It just feels so much tighter, so much more planted, and best of all has had very little effect on the ride quality of the car.

I would recommend doing them before adding big power mods to your car, it lets the sports car hidden behind soft springs and skinny swaybars shine through :P

Anyways I'm done ranting.. but if havent got swaybars you are missing out! ;)

Link to comment
https://www.sau.com.au/forums/topic/323675-swaybars-r33-gts25t/
Share on other sites
Harey Veteran

Harey

Posted
Posted (edited)

+3 I installed a whiteline adjustable rear swaybar on my R34 GTT yesterday and OMG what a difference. Car feels so stable and can go around corners much faster without realising it. Absolutely fantastic! Cant wait till I get the front sway bar on as well!

Havent been able to fully test it out as the roads were wet all day yesterday. Even in the wet its soo much better.

Edited by Harey
SoFreshSoClean Proficient

SoFreshSoClean

Posted
  • Author
Posted

Not sure mate, I have the adjustable ones from Whiteline (Which I think are the largest anyways). They have it set as hard as it goes on both sides and honestly to me it feels pretty good! Maybe on real rough corners it bounces a little too much but thats easily fixed by putting it on a lower setting.

Harey: Dont know about you but when powering out of a corner the back end just feels glued now, rather than that slightly dodgy leaning/twisting sensation I used to get. When you fit the front one you will definately notice it will feel a lot more responsive and resistant to understeer. :domokun:

Harey Veteran

Harey

Posted
Posted
Harey: Dont know about you but when powering out of a corner the back end just feels glued now, rather than that slightly dodgy leaning/twisting sensation I used to get. When you fit the front one you will definately notice it will feel a lot more responsive and resistant to understeer. :thumbsup:

Yup for sure. I find it hard to describe, summary it is VERY VERY GOOD! It also allows the car to take mid corner bumps while still keeping the car flat.

Checkbuzz Rising Star

Checkbuzz

Posted
Posted
what size is generally best on the rear for r33 street use?

i have a 24mm adj. going on the front, but i dont want to fit it till i have one for the rear

Hey mate

A 20mm adj rear sway bar is plenty on a street going R33. You will regret going and bigger than that as you will be lifting the inside wheel and loosing traction which is OK for drifting I guess but basically crap for everything else.

Also no worries fitting a bigger front sway bar without doing the same on the rear it will be a massive improvement. In fact some guys go back to stock rear sway on the track for traction reasons listed above. Bigger is not always better with sway bars.

Chuck that front one on and enjoy! :P

Munkyb0y Grand Master

Munkyb0y

Posted
Posted
Hey mate

A 20mm adj rear sway bar is plenty on a street going R33. You will regret going and bigger than that as you will be lifting the inside wheel and loosing traction which is OK for drifting I guess but basically crap for everything else.

Also no worries fitting a bigger front sway bar without doing the same on the rear it will be a massive improvement. In fact some guys go back to stock rear sway on the track for traction reasons listed above. Bigger is not always better with sway bars.

Chuck that front one on and enjoy! :banana:

doesnt it kind of promote understeer though, with only the front one done?

Kinks Grand Master

Kinks

Posted
Posted
doesnt it kind of promote understeer though, with only the front one done?

It may - although IMO the skyline is a taily car to begin with. I will probably end up with my new swaybars on middle front and soft rear, will start soft/soft and go from there but if i was a gambling man that would be my bet :D

SoFreshSoClean Proficient

SoFreshSoClean

Posted
  • Author
Posted
to everyone who has and recommends an adjustable one, have you actually played with the adjustments, or did you install it and adjust it to clear things and forget it?

I have to admit that I havent played with the settings, theyre both on hardest.. BUT I have king springs and standard shocks which are both fairly soft. In theory this keeps the car sitting flat while still being as grippy as a car with softer settings, and on my car I think I've hit a fairly good combination. My friend who drove it reckons it handles like a cat on carpet haha.

If you already have fully hektic coilovers/ you might be in a different position to me :D

siksII Grand Master

siksII

Posted
Posted
i have 24mm front and 20mm back its plenty :(

you do not want to go too big

They are the regular whiteline sizes for r33

I have 27mm and 24mm, doesnt feel too big to me, and like I said, theyre adjustable so if its too firm back it off :P

I use selby adjustable 27mm front and 24mm rear. Currently running front on 2/4 stiffness on either side and rear on full soft. Handling balance is pretty neutral, very little understeer and controllable oversteer that tends to want to straighten up rather than get bigger. This is with 180rwkw running r compound tyres.

Had the rear bar on full hard before - might be good on the track however it made the rear end feel a bit to sketchy for my liking. Hard to describe the feeling but I guess it felt like there was the chance of turn in oversteer and you couldnt fully trust it. Might have been better if I had adjusted the front stiffer but I couldnt due to the stock links not reaching the hardest two holes so I backed off the rear bar instead.

Now running street tyres which are wider at the rear but have not had a chance to try them out enough to make a judgment.

lookingforboost Community Regular

lookingforboost

Posted
Posted

i have the blade ajustible ones

24mm front BNF24Z

20mm rear BNR20Z

both are blade ajust set on medium front and rear feel amazing i think that they are perfect for a street car that goes to the track, i went drifting and the stability was so much better and far better than stock, i cant wait to get my coilovers in to see how much better it is after they are in!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...