Jump to content
SAU Community

Recommended Posts

hi everybody here i have a 2000 model r34 gtt auto in black:

mods are as follows:

- cooling pro return flow front mount intercooler.

-splitfire coilpacks

-5zigen catback exhaust (came with the car)

-custom dump and front pipe with a 3inch catco cat.

-apexi pod filter (came with the car)

-mv auto stage 2 shift kit (fitted 4000km ago with a service as well)

- kumho ku36 tyres ( travelled 4000km so far)

- project mu b-spec front brake pads ( travelled 4000km so far)

- changed the stock gauges to defi items (see pic below)

- larger transmission cooler

- nismo s-tune suspension

-still has the factory xenons on

i can throw in the stock side mount intercooler and a mv automatics 2800rpm stall converter.

also a new sony head unit that i havnt got around to getting fitted.

also has a australian standard imobiliser fitted.

car always gets serviced every 5000km by EAS performance.

the bad things about the car is the rims have gutter rash and there is a dent in the pasenger door that you can see in the right light and after getting the shift kit installed before start up the A/T light flashes which is a sensor playing up but doesnt effect the way it drives at all.

any questions dont hesitate to ask. rego runs out in september.

its travelled 85,xxxkm always runs on bp ultimate selling for $15,000 for legitamate reasons as i have a new car and ive got no room for this one and need it gone asap! from saying this i dont want any silly offers thanks im not giving it away im not that desperate :) . you can pm me here or contact me on 0403411821.

post-41669-1275992946_thumb.jpg

post-41669-1275993036_thumb.jpg

more pics can be found here: http://www.carsales.com.au/all-cars/privat...&__Qpb=true

Link to comment
https://www.sau.com.au/forums/topic/324090-r34-gtt-in-black-15000/
Share on other sites

Hey Scott g/l with the sale mate!

Would you be interested in selling your gauges for my stock gauges plus cash your way??

thanks mate, sorry but id prefer to sell the gauges with the car :blink:

Nice price dude.... I guess auto's are harder to sell.

thanks mate, yeah they aren't as popular as manual's for obvious reasons but im sure i should find someone, especially (i think) is a good price for what it is and what it has :P .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...