Jump to content
SAU Community

Recommended Posts

To all,

Remember way back when you were driving your shitbox corolla around because a. you didnt have the money to buy that series 4 rx7 or b. because there is nothing else good on offer at a reasonable price??

Those days are gone. You can now buy your r31 skyline, rx7, celica gt4 or even a ceffy if you are that way inclined for a CORRECT price (not a hugely inflated one). These cars are sometimes the only way an enthusiast starts his or her's lifelong desire for performance cars. The 15 year vehicles open the market to more people not only on price but also variety. As posted by drifft

Once RAWS settles down the only varying factor will be the cost of parts and the fee will be standard as anybody can now do any car on the list. Some people will pay up to $2,000 plus repair work to comply a 1988 RX7 and pay $4,500 + Tyres for 1997 Stagea.

With a buy price of 400,000 FOB plus a broker fee of $1,100 and compliance of $2,000 and ORC for a RX7 and a 1997 Stagea for 600,000 FOB, compliance of $4,500 plus tyres and I personaly know of workshops who will help you get a clean car for a no brokerage fee, if you use the right buyiers that send clean cars, (offical auction cost to show no kick back).

Please note - people who want to buy a stagea will buy a stagea. People who want to buy an rx7 will buy an rx7 - cost does not always come into it.

As for the brokerage system - this is my 2 cents.

I have purchased many vehicles through this system and have always had good results. I am buying cars cheaper than i ever could from the caryard - i am buying the car i want (the colour, the trim, the modifications (prior to raws)) at a price i can afford. If you have problems with a broker - go find another one, its that easy. Some people have been caught out by brokers, some by caryards, some even by our new raws people!!!! Do your &^*%# research people and dont get caught out. Ask your freinds where they bought their cars, or from which brokerage service - were they happy with the result?? the service?? the communication between themselves and the broker/caryard?? If you use your head you shouldnt have any problems.

If you want a broker to buy you good quality cars - pm me - i have no problems in recommending you to my broker.

thanks for listening

RBNT

Drifft,

(offical auction cost to show no kick back).

WTF?

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

The main point of view I have is this,

The system is for the enthusiast who want a Cerfino or RX7 not a 2 ton truck.

I wish it was left alone and said no Aussie delivered car should be allowed to come in and vehicles go through a tough pre rego check.

Most RAWS dont want to do cars older than 10 years anyway due to chance of failing inspection, finance and insurance.

What about John who owns www.therotaryshop.com.au and if the rule comes through what the **** is he going to do.

I own a hotted up series 4 RX7 and I dont want to sell it, but I still want a Chaser or Stagea.

A few people who wont sell the 100 plates would rather find a clean car for a customer than not sell a plate.

The price of R33's has already droped in the arese and it is as low as $3,300 plus tyres so it will happen to all of them.

(offical auction cost to show no kick back). WTF? That is because I know of one RAWS getting kick backs from Japan when he sells their stock.

If it was left alone it wouldnt worry me in the faintest, but with people using it as a loop hole to bring shitters in they had to go wait a minute sooner or later.

The point with RX7 against Stagea was what people are being charged and I did state it is just an example.

With compliance the cost was a at worst for states like NSW.

I am only trying to explain why these decisions are made not justify them in any way, this is what lobby groups use for as examples.

I do agree though that many of the people that complaining most veremently are those who were pushed into the 15 year things because they didn't have funds, willingness, or maybe even a clean enough record to be able to become a RAWS importer. And that is largely for *their* own self interest they are pushing people to lobby the government to scrabble, and claw with their last few steps until their business is extinguished. ..

They are the ones that you need to watch as they don't give a toss about the consumer, just lining their own pockets and doing the least they have to. For them its much "easier" and more profitable to not go through a strict importation regime. I'm not sayign that any out there do it "for the good of the people", and it is all about making money after all, but as anybody knows, there are legitimate ways of making money, and quicker and easier ways of making money.

The main point of view I have is this,  

The system is for the enthusiast who want a Cerfino or RX7 not a 2 ton truck.  

I wish it was left alone and said no Aussie delivered car should be allowed to come in and vehicles go through a tough pre rego check.

Most RAWS dont want to do cars older than 10 years anyway due to chance of failing inspection, finance and insurance.

What about John who owns www.therotaryshop.com.au and if the rule comes through what the **** is he going to do.

I own a hotted up series 4 RX7 and I dont want to sell it, but I still want a Chaser or Stagea.

A few people who wont sell the 100 plates would rather find a clean car for a customer than not sell a plate.

The price of R33's has already droped in the arese and it is as low as $3,300 plus tyres so it will happen to all of them.

(offical auction cost to show no kick back). WTF? That is because I know of one RAWS getting kick backs from Japan when he sells their stock.

If it was left alone it wouldnt worry me in the faintest, but with people using it as a loop hole to bring shitters in they had to go wait a minute sooner or later.

The point with RX7 against Stagea was what people are being charged and I did state it is just an example.  

With compliance the cost was a at worst for states like NSW.

I am only trying to explain why these decisions are made not justify them in any way, this is what lobby groups use for as examples.

Driftt,

Well done buddy, you have had a shot at the two biggest business units that are steering the wheels of the JDM import industry into Aus (brokers/raws). Opinions are like assholes, everyone has one. Everyone has had a go at George dubbya Bush too - is he next your target???

Moderators please pm me if you feel that this over the line and I will post an apology.

Best regards all,

RBNT

  • 9 months later...
Everyone has had a go at George dubbya Bush too - is he next your target???

If he's not he should be...Haha

Anyway, on a more sensible note, i aggree with the proposal of revising the SEVS import scheme. Thus reducing the number of 15 yr imports. I recently bought a '89 GTR and had always planned for my next car to buy sumthing under the SEVS scheme. Something newer.

IMO - this change = biggest cow dung u can find. :spcow:

As pointed out - that jap 15 yr old imports are far more superior than local cars of similar age in terms of safety and emission. So if one compares 10 local old bombs with 10 jap 15yr old imports - emission will from jap imports would be much lower than local old bombs. Regulations and policies in Japan is more stringent than aus.

The fear and speculatiion that jap imports will kill local car market = biggest pile of cow dung. :spcow:

I think the gov't can get away with things like this - becos it is functioning like a mafia gang... :skull:

Consumers are being bullied by all these red tapes and cow dung.

Lucky I bought my GTR at this year.

But still I should say for the japanese cars. When they came out that was brand new. You wouldn't have any problems on it. But when the age came up, it will start break every single part that u can image. Coz that's happened on my 89 GTR. Spent 1000 already for just repair it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...