Jump to content
SAU Community

Recommended Posts

** No Trades Please ***

2001 ADM 200SX

Manual 6 Speed

Red

154xxx Kms, Highway / Daily driven

Dyno printout 153Rwkw on Low / 170Rwkw High. Potential for 190Rwkw with more aggressive tune.

Mods

Apexi Power FC with Hand Controller.

Pod Filter

ISC Front Mount Intercooler

Trust Power Extreme 2 turbo back 3" Exhaust Stainless Steel.

Eboost 2 electronic boost controller set to 9 low / 14 High

Upgraded Fuel Pump

Dash Mat and Floor Mats.

Interior in great condition.

Aircon works great.

Alarm fitted.

Sony headunit with Aux input.

Alpine Type R Speakers all round.

4 channel and 1 channel Kicker Amps

Custom made 12" Sub Box in boot (No sub fitted)

Includes stock computer and intercooler.

Non smoker / No Pets

Car owned freehold.

Price Firm / Non Negotiable / No Haggle

Want it cheaper:

BYO Rims take off $500

No Stereo - take off $300

Pics / Contact Details on carsales:

http://www.carsales.com.au/all-cars/privat...3&silo=1011

Edited by bradkak
Link to comment
https://www.sau.com.au/forums/topic/324572-red-s15-200sx-silvia-manual/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...