Jump to content
SAU Community

Recommended Posts

Hello, i need to replace one stud (rear). the thread on it is worn off so im driving with 4 studs.

are the studs singles or are they all on the one hub??

i tried using the search function, but didnt show anything useful. and im tooo lazy to jack my car up and check it all out.

anyone know??

cheers

Link to comment
https://www.sau.com.au/forums/topic/324590-stud-screw-replacement/
Share on other sites

its not good to be driving on only one

it can take all the other studs past their yeild point and stretch them irreversibly

you will have to go to bursons or the like, ask for r33 gtst/gtr studs as they will not have heard of a stagea

your better off knocking one out and taking it in, there are a few different styles/sizes of stud where they fit into the hub, then you know your getting the right one. i picked up a heap for my 32 from repco, only a couple dollars each. just got to make sure you get the right length, tread size & pitch, and hub fitment.

your better off knocking one out and taking it in, there are a few different styles/sizes of stud where they fit into the hub, then you know your getting the right one. i picked up a heap for my 32 from repco, only a couple dollars each. just got to make sure you get the right length, tread size & pitch, and hub fitment.

good idea, takes 30 mins max and most places triple the price as soon as the word import is involved

oh thats easy, that means i can just quickly replace it. oh and for the reckord, im driving with 4 studs bolted and one stud unbolted. lol so not the other way around, i aint that stoopid :ninja:

thx for the answers.

and please, for the love of all that is good and holy, DONT replace one stud. As previously mentioned, the other 4 WILL stretch so its much safer (and easier in the long run) to replace all of the studs in the hub affected.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...