Jump to content
SAU Community

R32 Gtr Rb26dett Engine $5200 Ono

Richo11
 Share

Recommended Posts

Richo11 Apprentice

Richo11

Posted
Posted

I have a complete RB26DETT for sale that is from an R32 GTR.

I had this in my vl but its time to cut my loses and sell up on everything - new projects in mind.

The engine has been stripped down, checked, cleaned and put back together with all new gaskets etc. Anything that needed to be replaced did.

I have detailed this engine from ground up.

The covers have been smoothed where needed and painted in clear over base custom Silver.

Lots of bits and pieces polished by a professional (Twin Turbo Pipe, fuel reg etc).

Everything else such as water lines have been hand polished.

Nuts and bolts have been replaced with all brand new stainless steel.

I no longer have the GTR sump, I have a modified sump to make it rear wheel drive only - so this will suit anyone with a GTST

The engine comes complete. Turbos are perfect etc. I can chuck in the board of a Mines ECU to go with it, which can go into your ECU casing.

I have an R32 GTR style intercooler than you can have for an extra $200 - can supply photos if needed. Its painted the same colour as the engine covers.

28042009704.jpg

p7010308z.jpg

img0156ev.jpg

photo7x.jpg

The engine is completely stock, but everything is in perfect working order. As stated above its all been checked, cleaned and run and tested. As you can see there is a lot of hours spent getting this to look a show piece.

Engine is located in Eastern Suburbs of Melbourne, inspections more than welcome.

If you have any questions do not hesitate to contact me on 0419 387 858

Im sure I have left out some info so if I have, just let me know.

Link to comment
https://www.sau.com.au/forums/topic/324792-r32-gtr-rb26dett-engine-5200-ono/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      iPad gauge cluster

      By PranK · Posted

      Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...