Jump to content
SAU Community

Recommended Posts

as topic state looking for rolling shell doesnt matter if the engines blown or if there is no engine, as long as the body is in good condition, prefer not to have paint faded and no dents, or missing panels but let me know what you got.

Prefer in Brisbane area so i can pick up.

contact via pm here and if possible a photo area and price.

Thanks :)

Lok

R33 GTS-t...

Pretty good condition, almost complete but has spun bearing.

Would come with lots of practically brand new performance parts good for over 300rwkw..

HKS 3037 56t .86 Turbo

HKS Standard 50mm Wastegate

Custom Exhaust Manifold – Ceramic heat coated

3.5' split dump pipe.

600x300x76 Hybrid Intercooler

Custom intecooler / intake piping to suit

All Hoses / Clamps / Silicone Joins to suit

Rebuilt RB25 Head

This was only recently reconditioned and reassembled by Colin Lloyd Headsense. Has only been used for a total of 6 hours on the dyno since rebuild.

Tomei 256 8.5mm cams

Tomei 8.5mm Valve springs

New guides & Retainers

Ported intake and Exhaust

HKS CAM Gears

Cam covers have been powder coated gold

Greddy Oil Cap

Kakimoto Regu 06&R Exhaust & 100 cell high flow cat

Apexi AVC-R -

Oiler cooler Kit

ISC Radiator

Q45 AFM & Z32 AFM

+ Lots more... Make me an offer for the lot

  • 3 weeks later...

Hey mate thanks for ur post but i already have a 33 i was looking more toward a s13 or r32 cause i have a rb25 i want to put into it to make into a track car, but i think i may already found one.

Thanks

Lok

R33 GTS-t...

Pretty good condition, almost complete but has spun bearing.

Would come with lots of practically brand new performance parts good for over 300rwkw..

HKS 3037 56t .86 Turbo

HKS Standard 50mm Wastegate

Custom Exhaust Manifold – Ceramic heat coated

3.5' split dump pipe.

600x300x76 Hybrid Intercooler

Custom intecooler / intake piping to suit

All Hoses / Clamps / Silicone Joins to suit

Rebuilt RB25 Head

This was only recently reconditioned and reassembled by Colin Lloyd Headsense. Has only been used for a total of 6 hours on the dyno since rebuild.

Tomei 256 8.5mm cams

Tomei 8.5mm Valve springs

New guides & Retainers

Ported intake and Exhaust

HKS CAM Gears

Cam covers have been powder coated gold

Greddy Oil Cap

Kakimoto Regu 06&R Exhaust & 100 cell high flow cat

Apexi AVC-R -

Oiler cooler Kit

ISC Radiator

Q45 AFM & Z32 AFM

+ Lots more... Make me an offer for the lot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dose will be able to confirm this more, but a 1.5 way IS a 2 way. It's just not as aggressive on one of the ramps. Changing from 2 to 1.5 I'm not sure how though.
    • No updates on the car but figured I'd share a nice outing. All the recent work paid off and I got it all together and out the shed for a car based pre-wedding celebration for a good mate of mine. Pretty casual cruise through the hills to a pub for lunch then out for some go-karting at The Bend. Headed down to Myponga for the night We stopped in at the reservoir before heading out down to the coast for lunch via the dam  By the end of the weekend away I covered 350km and the 32 generally behaved its self. A good Shake down after being apart before the Track day in a few weeks  
    • The front prop shaft from my GTR had very notchy unis, which obviously needed replacement but unfortunately uses the (usually) non-replaceable (staked) type.     A new shaft is something like $2K plus shipping from Japan.   I wouldn't even bother asking the local Nissan spares dept.     Rang Hardy Spicer but no go, which surprised me a little.     There's a place over Dandenong way that would make me a 'performance' shaft but un-necessary in my situation.   They claimed to be getting the equipment in to replace staked unis but couldn't give me a timeframe.   Anyway, long story short, found a place to do the work just 5 mins from me: https://knoxdriveshafts.com.au $420 (cash) and about a week later I have my driveshaft back.   Price includes balancing. Owner is a one man band working out of a shed in his backyard but from what I could see he's very well setup with some expensive equipment.  
    • Thanks. That's what I was after. One of the kits, the o-ring side is too big diameter. The other kit is a plate with a o-ring to seal and the hose connection offset.
×
×
  • Create New...