Jump to content
SAU Community

Recommended Posts

* Front Mount Intercooler

* Full 3inch exhaust from turbo back

* Adjustable T boost controller

* Pod filter

* VL Fuel Regulator (not shown in pic)

* Slightly lowered

* Tinted windows

* DVD Player

* Engine brace

* G Max sport 19" rims worth over $3500 (brand new tyres on all 4)

* 66,288kms (apparently original kms from what the old guy was saying, car wasn't running for 5yrs)

* if wanted car can be sold with Volt Rocks rims 19x8 (crome pics)

NO MARKS on them 2 rims have 90% and 2 have 50% tread Multi Stud.

I also have dyno sheet for when I check the motor, and pulled 153rwkw on stock boost.

Car has new fuel filter, Oil filter, HKS air filter, spark plugs,battery and runs Castrol synthetic oil 10 - 40

Car does not come with roadworthy or rego, will not be hard to get as there is nothing wrong. I dont have the time to get one as I work 6 days a week.

Car is running on a permit for now.

Car drives very very well and will impress.

Right now car is under a carport and will be for a little while, If the car doesn't sell I will end up keeping it in storage.

PRICED DROPPED 7800.00

Please no time wasters or test pilots. FIRST TO SEE WILL BUY

0412740116 pics up soon

Link to comment
https://www.sau.com.au/forums/topic/325297-black-r32-for-or-swap/
Share on other sites

Where are you located?

* Front Mount Intercooler

* Full 3inch exhaust from turbo back

* Adjustable T boost controller

* Pod filter

* VL Fuel Regulator (not shown in pic)

* Slightly lowered

* Tinted windows

* DVD Player

* Engine brace

* G Max sport 19" rims worth over $3500 (brand new tyres on all 4)

* 66,288kms (apparently original kms from what the old guy was saying, car wasn't running for 5yrs)

* if wanted car can be sold with Volt Rocks rims 19x8 (crome pics)

NO MARKS on them 2 rims have 90% and 2 have 50% tread Multi Stud.

I also have dyno sheet for when I check the motor, and pulled 153rwkw on stock boost.

Car has new fuel filter, Oil filter, HKS air filter, spark plugs,battery and runs Castrol synthetic oil 10 - 40

Car does not come with roadworthy or rego, will not be hard to get as there is nothing wrong. I dont have the time to get one as I work 6 days a week.

Car is running on a permit for now.

Car drives very very well and will impress.

Right now car is under a carport and will be for a little while, If the car doesn't sell I will end up keeping it in storage.

PRICED DROPPED 7800.00

Please no time wasters or test pilots. FIRST TO SEE WILL BUY

0412740116 pics up soon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...