Jump to content
SAU Community

Recommended Posts

i got this weird prob with my 32

it seems to misfire when i rev it and idle is pretty rough when i have the filters fitted, took the filters off and it ran all smooth

the filters are new and the afm i am running are MINES afms

any ideas???

Link to comment
https://www.sau.com.au/forums/topic/326187-got-a-weird-prob/
Share on other sites

what brand of filter? it sounds like maybe.... (if its a wet/oil soaked type air filter like K&N) that a bit of the oil is being sucked through the afm and messing with the readings. causing rough idle/missing etc..thats my 2cents anyway

If it was wet type, he'd still have the problerm after removing the filters, is sticks on there, if it was sucking that much in, he'd have to drown the filters in oil...sure he isnt that silly ?

Give the sensor in the AFM a clean with some CRC and reset your ECU.

Running a tune ?

Air leak somewhere perhaps?

Also. Straight 5-56 CRC lubricant isn't a great idea.. everything sticks to CRC. proper way to clean an airflow metre is to take it off the car, get CRC Mass Airflow Sensor cleaner. Clean it, let it dry, and put it back on.

Maybe try borrowing someones filters to put on? Doubt it's the filters though, but that will rule that out. If that doesn't work, maybe borrow their AFM's and see if that fixes it... Just eliminate possibilities

well cars are just weird, i changed the spark plugs over with new ones seems all good now. (old ones were black)

btw im running powerfc do i need to retune since i got MINES afms?

hmm its possible the ecu may need a retune. if it comes back start at the cheapest options and work your way up from there, as stated earlier borrowing parts is a cost effective way of eliminating potential causes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...