Jump to content
SAU Community

Recommended Posts

ok guys, this sound has become apparent since the last oil change (now on roughly 6000kms thanks to Canberra - Melbourne return, doing again this wednesday), or a stack of suspension/steering work I had done at the same time, and only ever happens on a cold engine though it lives outside so is much more likely to do it when I start it in the morning after freezing overnight.

The only thing I can relate the sound to would be the sound you make when sucking the last bit out of a milkshake or thickshake through a straw - you know, the sound you're embarrassed to make sometimes coz it's loud. It appears to be coming from under the front of the car, hence engine.

It is able to be "recreated" as I reverse down my driveway, as it's relatively steep and places the car on quite an incline. Has only done it on one occasion before I've even moved the car, which was this morning, hence why I'm writing this. As I'm reversing down the driveway, when I touch the brakes or bring the car to a stop, this is when the sound occurs. It's as though the car stopping causes whatever is making this sound to move backward through momentum, and do it's thing.

I don't understand the insides of the sump, and how oil pickups etc work, but from an ignorant point of view I have suggested something like the oil moving to the back of the sump as I brake on my driveway....but this has been dismissed (not to mention why does it only happen on a cold engine?)

Whatever's causing this can also be felt through the firewall via my foot on the clutch, so something is definitely vibrating or something.

Mods are only 3.5" turbo back, FMIC, bleed valve @11psi...suspension is bushes bushes bushes, ISC coilovers, rack mounts, front+rear upper camber arms, rear traction, and HICAS lock...though I don't think any of this will be the culprit...

/end wall of text, thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/326594-mysterious-sound-on-cold-start/
Share on other sites

Bleed your cooling system and make sure the heater is turned on when you do so and try to do it on a hill so the air moves towards the front of the engine.

Sounds like the water is moving about. It's the sound it will make when air is travelling through the system.

yes, it definitely sounds like air through a liquid system, though what do you mean by "cooling" system? As in, water/radiator etc etc, or aircon?

And if you're correct, this wouldn't be detrimental at all would it? Not causing damage that is

generally wont have harmed your system, as long as engine temps havent been out of control it will be fine.

cooling system refers to water/radiator. when you bleed/flush your cooling system you need to have the heater controls set to hot and turned on so that the cooling system is fully open and you dont trap any air in the heating system. the best way i find to absolutely guarantee no air in the system is to have the radiator cap off, pull off one of the heater hoses on the firewall and place your thumb over the end, then shove a running garden hose into the fitting on the firewall. when the air bubbles stop coming out the top of the radiator, system is bled. should take up to 15secs or so (dont take forever doing this or eventually your anti-freeze will become plain water) quickly remove garden hose and re-attach the heater hose to the fitting on the firewall and replace radiator cap.

this method is yet to fail me.

Edited by jonboy

ah ok, makes sense now ;) since it's going into the shop on wednesday for brake machining/general service, I'll get them to do that too.

Aftermarket gauge has never red more than 90 deg, and will sit on 80 - 85 during normal operation, so overheat definitely hasn't occurred :)

Thanks for the input guys, much appreciated! Will update with results later in the week for future reference

will have to have that looked at too....I've noticed my fluid was low a while back, though it hasn't gone down since I topped it up....

Dropping it off at workshop tonight so they can leave it outside over night and start it when the thing is frozen in the morning, hopefully it makes the same noises and they can work it out.

OH just realised though...it's making a sound before I even touch the wheel, but the main sound is after I've turned it (not directly after, but the steering has moved before I ever notice it)...still reckon the rack is possible?

Mine makes the noise before turning the steering wheel aswell. The power steering pump is driven by a pully off the engine, so if your engine is pumping, so is the power steering pump (whether or not you are turning the wheel or not).

* thats my take on it, someone correct me if I'm wrong.

the pump is turning yes, but the rack itself doesn't receive anything until you turn the wheel....well at least that MY take on it lol.

Either way, at least you've given me something else to suggest when I drop it off...some small part of me wants it to be a big bad monster so I can get the thing built lol...oh I don't know :)

Yeah air in liquid (be it water, power steering pump....even oil, though that's VERY unlikely) seems like the culprit...

And yes Pat, I want to have to rebuild lol, coz upgrades are coming very soon, so I could same some labour cost in the long run by having it built now rather than when it eats shit. I already suspect a bearing on the exhaust cam is on the way out...downside of waiting 'til she pops, is that I could make a big mess.

Mechanic suspects power steering pump. They only heard a faint sound once on first cold start, but nothing afterward.

Ah well, at least they're 99% sure there's nothing bung in the engine, which is fine in my books.

Thanks for the input nonetheless guys :/

Bump.

OK so whether is be coincidence that it has stfu or what, my car has not made this mysterious sound once since the service.

Unless the workshop flushes the water system without telling me (which I doubt, as when there's a highish labour charge, they list everything they did), then the only thing they did that would change anything was an oil+filter change.

Other work done was replace a coilpack (as it developed a miss while they were checking it out - I don't doubt this either) and machine the discs/deglaze pads (front)

So is it coincidence that it resolved itself at the same time, or is it possible this sound had something to do with oil?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...