Jump to content
SAU Community

Recommended Posts

ok guys, this sound has become apparent since the last oil change (now on roughly 6000kms thanks to Canberra - Melbourne return, doing again this wednesday), or a stack of suspension/steering work I had done at the same time, and only ever happens on a cold engine though it lives outside so is much more likely to do it when I start it in the morning after freezing overnight.

The only thing I can relate the sound to would be the sound you make when sucking the last bit out of a milkshake or thickshake through a straw - you know, the sound you're embarrassed to make sometimes coz it's loud. It appears to be coming from under the front of the car, hence engine.

It is able to be "recreated" as I reverse down my driveway, as it's relatively steep and places the car on quite an incline. Has only done it on one occasion before I've even moved the car, which was this morning, hence why I'm writing this. As I'm reversing down the driveway, when I touch the brakes or bring the car to a stop, this is when the sound occurs. It's as though the car stopping causes whatever is making this sound to move backward through momentum, and do it's thing.

I don't understand the insides of the sump, and how oil pickups etc work, but from an ignorant point of view I have suggested something like the oil moving to the back of the sump as I brake on my driveway....but this has been dismissed (not to mention why does it only happen on a cold engine?)

Whatever's causing this can also be felt through the firewall via my foot on the clutch, so something is definitely vibrating or something.

Mods are only 3.5" turbo back, FMIC, bleed valve @11psi...suspension is bushes bushes bushes, ISC coilovers, rack mounts, front+rear upper camber arms, rear traction, and HICAS lock...though I don't think any of this will be the culprit...

/end wall of text, thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/326594-mysterious-sound-on-cold-start/
Share on other sites

Bleed your cooling system and make sure the heater is turned on when you do so and try to do it on a hill so the air moves towards the front of the engine.

Sounds like the water is moving about. It's the sound it will make when air is travelling through the system.

yes, it definitely sounds like air through a liquid system, though what do you mean by "cooling" system? As in, water/radiator etc etc, or aircon?

And if you're correct, this wouldn't be detrimental at all would it? Not causing damage that is

generally wont have harmed your system, as long as engine temps havent been out of control it will be fine.

cooling system refers to water/radiator. when you bleed/flush your cooling system you need to have the heater controls set to hot and turned on so that the cooling system is fully open and you dont trap any air in the heating system. the best way i find to absolutely guarantee no air in the system is to have the radiator cap off, pull off one of the heater hoses on the firewall and place your thumb over the end, then shove a running garden hose into the fitting on the firewall. when the air bubbles stop coming out the top of the radiator, system is bled. should take up to 15secs or so (dont take forever doing this or eventually your anti-freeze will become plain water) quickly remove garden hose and re-attach the heater hose to the fitting on the firewall and replace radiator cap.

this method is yet to fail me.

Edited by jonboy

ah ok, makes sense now ;) since it's going into the shop on wednesday for brake machining/general service, I'll get them to do that too.

Aftermarket gauge has never red more than 90 deg, and will sit on 80 - 85 during normal operation, so overheat definitely hasn't occurred :)

Thanks for the input guys, much appreciated! Will update with results later in the week for future reference

will have to have that looked at too....I've noticed my fluid was low a while back, though it hasn't gone down since I topped it up....

Dropping it off at workshop tonight so they can leave it outside over night and start it when the thing is frozen in the morning, hopefully it makes the same noises and they can work it out.

OH just realised though...it's making a sound before I even touch the wheel, but the main sound is after I've turned it (not directly after, but the steering has moved before I ever notice it)...still reckon the rack is possible?

Mine makes the noise before turning the steering wheel aswell. The power steering pump is driven by a pully off the engine, so if your engine is pumping, so is the power steering pump (whether or not you are turning the wheel or not).

* thats my take on it, someone correct me if I'm wrong.

the pump is turning yes, but the rack itself doesn't receive anything until you turn the wheel....well at least that MY take on it lol.

Either way, at least you've given me something else to suggest when I drop it off...some small part of me wants it to be a big bad monster so I can get the thing built lol...oh I don't know :)

Yeah air in liquid (be it water, power steering pump....even oil, though that's VERY unlikely) seems like the culprit...

And yes Pat, I want to have to rebuild lol, coz upgrades are coming very soon, so I could same some labour cost in the long run by having it built now rather than when it eats shit. I already suspect a bearing on the exhaust cam is on the way out...downside of waiting 'til she pops, is that I could make a big mess.

Mechanic suspects power steering pump. They only heard a faint sound once on first cold start, but nothing afterward.

Ah well, at least they're 99% sure there's nothing bung in the engine, which is fine in my books.

Thanks for the input nonetheless guys :/

Bump.

OK so whether is be coincidence that it has stfu or what, my car has not made this mysterious sound once since the service.

Unless the workshop flushes the water system without telling me (which I doubt, as when there's a highish labour charge, they list everything they did), then the only thing they did that would change anything was an oil+filter change.

Other work done was replace a coilpack (as it developed a miss while they were checking it out - I don't doubt this either) and machine the discs/deglaze pads (front)

So is it coincidence that it resolved itself at the same time, or is it possible this sound had something to do with oil?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...