Jump to content
SAU Community

Recommended Posts

Hi all,

Selling my Diff back Varex twin tip muffler.

As new, bought off a mate for my Skyline, decided to put it on my WRX but can't be stuffed, so thought i'd sell it.

As new, painted black (to be more stealth)

Cables and control unit as new

Will bolt up on to 3" exhausts or with a flange to stock exhausts.

$350ono

Will post (should be about $30-$50 depending on where)

Pics to come.

Pls contact here or 0420 528 125

  • 2 weeks later...

How much did the sound differ on idel on the 33 when it was open and when it was close? if that makes sense, how much quieter did it make it? 20% 30% 40% 50% 60% more/less? also how much quieter at mid revs? at a guess

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I had ordered the spherical bushings at the same time as the rest. I have high hopes for the anti squat reduction kit. 
    • Make sure you use the spherical bushes** on the lower arms, ifyou do that. ** at least, if not the whole replacement lower arm.
    • The tap for coolant flow control will be stuck open. It's not just the air door motor that dies.
    • Not really, but the heater box is pretty simple mechanically....if the door is one way the air bypasses the heater core and if it is the other way it goes through it for warm air.  If you are sure the actuator you moved manually is for the heater mix (there would also be one for output air direction) then I'd take the heater box out and see what is happening (you'll have to regass and re-coolant the systems afterwards) BTW pp724 onwards from the GTR workshop manual cover the system in good detail, it is probably worth checking. I think the IAT sensor might be a problem electrically for getting cold (if you got 24 error code not -24 it thinks the incoming air is -50c) and it covers how to test the sensor (although most likely it is either not plugged in or a wire is damaged)
    • Use the GKTech subframe bush and bring your subframe 10mm closer to the chassis. You'll need to fix an exhaust hanger to suit. One of the best mods I've done.
×
×
  • Create New...