Jump to content
SAU Community

Recommended Posts

Sup, as described in heading,

Before I go to Nissan sourcing 'new' parts, figured someone's wrecking some of these random items. All for R32 GTR.

1x Headlight Switch Assembly. I may also take the whole fascia that surrounds the cluster.

1x Battery Cover. "If" they help hold the battery a little more still. I have the clamp but no battery cover, so only sheer clamp force will hold the battery firm.

10x Floor plugs. (The ones you will find holding your boot trim to the car)

The parts that sit in the door trims to hold the 4x6" speaker in place. Namely the speaker mounts, anything that stacks on top of them, and the "active speaker" stock speaker covers.

1x Spare wheel (can come in the form of a radial with no tyre, mainly after the rim)

1x Spare wheel cover.

1x Drivers seat adjusting lever. (The plastic handle)

1x Centre console fascia. Gloss black. (The plastic surrounding the radio/climate/centre gauges) - Ashtray and lighter optional.

1x ABS Unit. (The solonoid block near the turbos)

PM any costs + delivery to 2259.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/327597-lf-r32-gtr-parts/
Share on other sites

Sup, as described in heading,

Before I go to Nissan sourcing 'new' parts, figured someone's wrecking some of these random items. All for R32 GTR.

1x Headlight Switch Assembly. I may also take the whole fascia that surrounds the cluster.

1x Battery Cover. "If" they help hold the battery a little more still. I have the clamp but no battery cover, so only sheer clamp force will hold the battery firm.

10x Floor plugs. (The ones you will find holding your boot trim to the car)

The parts that sit in the door trims to hold the 4x6" speaker in place. Namely the speaker mounts, anything that stacks on top of them, and the "active speaker" stock speaker covers.

1x Spare wheel (can come in the form of a radial with no tyre, mainly after the rim)

1x Spare wheel cover.

1x Drivers seat adjusting lever. (The plastic handle)

1x Centre console fascia. Gloss black. (The plastic surrounding the radio/climate/centre gauges) - Ashtray and lighter optional.

1x ABS Unit. (The solonoid block near the turbos)

PM any costs + delivery to 2259.

Thanks in advance.

Hi mate give Erwin a call i know he Wrecking complete R32 GTR so im sure he got all the parts you need.

0410069096 or sms him.

pretty sure i have one, will get back to ya

** EDIT: is this what you are after?

DSC00334.jpg

I haven't taken it out yet so I dont know what it looks like underneath, but that looks to be the part yeah. Does it work properly? Mine turns only one light on, the maybe the other if it wants, taked 100 goes to get both lights on. I heard the lights run off the switch without relays, so I'll be wiring up a set of relays this weekend to save the next switch a bit.

How much if it's good mate?

Hi mate give Erwin a call i know he Wrecking complete R32 GTR so im sure he got all the parts you need.

0410069096 or sms him.

Interesting you say that, I just bought a rear seat off him and thought he rorted me! Lol but it's ok it came through today, I was worried cause of another issue we had bout 12 months ago when I received some faulty stuff, which he since replaced free of charge. I'll give him a call anyways, thanks!

I have the ABS Unit here ready to go

$150 plus delivery from perth

PM me if you want or msg me on 0422 648 745

Thanks Daniel

Hey Daniel,

The prob with mine is it's leaking, spoke to a few people and they say it's rare for them to leak? So I must ask the question for the record, does yours leak? :ninja:

Thanks all who are helping me out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...