Jump to content
SAU Community

Recommended Posts

Hey ,

Got my car from Japan today - Driving it home, realised that the rear suspension squeaks to buggery !! It's really annoying as it only happens when you are going really slowly with little to no engine noise. Its like the rear shocks go down like 1-2mm and it make this god awful noise.

The car has after market coils and shocks - don't know what brand yet as I haven't had time to pull the back wheels off. All four corners are damn stiff though.

Put it this way, you open the boot and push down on the rear and you can hear this noise squeak thu the chassis.

It sounds like the shocks need a bit of an oil - But I thought this was all internal ??

The car handles well and can take a fairly decent pothole without jarring too much.

Can anyone gimme some advice on what to look for or what to do with this problem ??

Many Thanks,

Link to comment
https://www.sau.com.au/forums/topic/3281-sqeaky-rear-suspension/
Share on other sites

Ripped wheels off tonight -

The shocks are Tanabe? (never heard of them??) - Looks like the rubber boot that is meant to go over the main shaft of the shock has perished. Don't know if the shocks are any good or not - So I WD40'd the lot - The noise is better, but still there.

I might take it down to Pedders or another suspension shop = see what they reckon.

Recomendations for suspension shops in Sydney ???

Cheers/

yeah i was goin to say that but i didnt know how to explain it the springs sometimes squels where it sits in the shoe of the shock usually cause aftermarket stuff is metal on metal wheras factory have a little rubber boot on the ends of the springs id say a generous amount of electrical tape would do the same thing wrapped around the end of the spring crap job though pulling all the springs out for squeekes!!:D

tanabe usually supply things to nissan like radiators and hoses n ***** are they anything special like hieght adjust. or shocker adjustable if not i didnt know they made shocks!!! Just be carefull with places like pedders cause they try n tell you all this stuff that there "diagnostic machine told them" about you need this that and the other replacing so they can make some money off you

No, not adjustable or anything (Damn Hard though) - The shock part of it is Orange and I they are called Viper Street somethings - Looks like you can undo the top of the strut tower and remove the shock cartridge (As you can tell I have no idea what all this stuff is called) Anyway , it didn't look to difficult to get at so I might pull them apart, clean everything , make sure all the rubbers are OK, test the shocks. Dunno what to do if the shocks need replacing as there would be no Tanabe spares in Aust hey ? Maybe someone else make a shock that is the same ??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...