Jump to content
SAU Community

Recommended Posts

Just realised my car insurance is due soon dammit

3" mild steel custom straight through catback exhaust with twin tips

No mid muffler-increases power heaps & sounds evil

Fits r33 gts/gtst perfectly but will fit s14's if shortened

Will fit other cars if modified

$280 ono

One new gold Driftek rim 17x9 +30

Has had tyres fitted & removed shortly after

No scratches/scuffs/gutter rash at all

$280 ono

Pair of stock r32 gtst 16x7 rims in VGC

tyres are just above tread makers but are camber worn a bit

$100 ono

Can deliver them for extra fuel money or post/courier

Pickups from Maroochydore-Sunshine Coast-QLD-4558

PM to contact

post-59075-1278585748_thumb.jpg

the two r32 gtst stock rims are silver

also have a set of stock silver s15 rims/tyres

all tyres have heaps of tread

$400 ono

don't really want to sell any of this stuff but have to pay car insurance for 12 months

post-59075-1278673455_thumb.jpg post-59075-1278673526_thumb.jpg

Can deliver the catback zorst within 150 K's from the Sunshine Coast for extra fuel $-it's on my r33 now

u should do a road trip to townsville lol il give u my stock exhaust lol

^^^PM sent -the other day

Also have an all black original MOMO "Tuner" leather steering wheel with two lines of red stitching on the inside

Looks new-no scratches in leather at all-horn button,etc included

Was fitted on a 1995 r33 gtst but will fit most other cars with the right boss kit

or you can get a boss kit to suit it-there fairly cheap & easy to fit yourself

35cm in diametre-centre of mounting holes are 70mm across & 35mm apart

$280 ono

post-59075-1278937346_thumb.jpg post-59075-1278937592_thumb.jpg

post-59075-1278937645_thumb.jpg

Also have...

-Mint r33 carbon fibre drift/stealth spoiler [also called a duck wing]

fits perfectly-not warped at all-no damage

SAU member i bought it off said it was imported from Japan

$300 ono

-VGC anodised red lightweight r33 front strut brace [unknown brand]

$80 ono

-4xStock r34/Stagea wheels with a bit of gutter rash

$200 ono

-Stock 16" r33 gts/gtst suspension-complete set with stock springs

$150 ono

-Stock r33 suspension with stock springs-complete set

$100 ono

-Stock VGC series 1 r33 spoiler-original burgandy paint

$100 ono

post-59075-1279186687_thumb.jpg post-59075-1279186699_thumb.jpg post-59075-1279186734_thumb.jpg

Also have...

-MOMO "corse" 320mm all black leather steering wheel VGC

Has two lines of red stitching on the inside

A few scuffs/marks but in good condition-horn,etc included

35cm in diametre-centre of mounting holes are 70mm across & 35mm apart

$160 ono

post-59075-1280023485_thumb.jpg post-59075-1280023557_thumb.jpg post-59075-1280023634_thumb.jpg

post-59075-1280023869_thumb.jpg post-59075-1280024669_thumb.jpg

post-59075-1280024924_thumb.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...