Jump to content
SAU Community

Recommended Posts

Just realised my car insurance is due soon dammit

3" mild steel custom straight through catback exhaust with twin tips

No mid muffler-increases power heaps & sounds evil

Fits r33 gts/gtst perfectly but will fit s14's if shortened

Will fit other cars if modified

$280 ono

One new gold Driftek rim 17x9 +30

Has had tyres fitted & removed shortly after

No scratches/scuffs/gutter rash at all

$280 ono

Pair of stock r32 gtst 16x7 rims in VGC

tyres are just above tread makers but are camber worn a bit

$100 ono

Can deliver them for extra fuel money or post/courier

Pickups from Maroochydore-Sunshine Coast-QLD-4558

PM to contact

post-59075-1278585748_thumb.jpg

the two r32 gtst stock rims are silver

also have a set of stock silver s15 rims/tyres

all tyres have heaps of tread

$400 ono

don't really want to sell any of this stuff but have to pay car insurance for 12 months

post-59075-1278673455_thumb.jpg post-59075-1278673526_thumb.jpg

Can deliver the catback zorst within 150 K's from the Sunshine Coast for extra fuel $-it's on my r33 now

u should do a road trip to townsville lol il give u my stock exhaust lol

^^^PM sent -the other day

Also have an all black original MOMO "Tuner" leather steering wheel with two lines of red stitching on the inside

Looks new-no scratches in leather at all-horn button,etc included

Was fitted on a 1995 r33 gtst but will fit most other cars with the right boss kit

or you can get a boss kit to suit it-there fairly cheap & easy to fit yourself

35cm in diametre-centre of mounting holes are 70mm across & 35mm apart

$280 ono

post-59075-1278937346_thumb.jpg post-59075-1278937592_thumb.jpg

post-59075-1278937645_thumb.jpg

Also have...

-Mint r33 carbon fibre drift/stealth spoiler [also called a duck wing]

fits perfectly-not warped at all-no damage

SAU member i bought it off said it was imported from Japan

$300 ono

-VGC anodised red lightweight r33 front strut brace [unknown brand]

$80 ono

-4xStock r34/Stagea wheels with a bit of gutter rash

$200 ono

-Stock 16" r33 gts/gtst suspension-complete set with stock springs

$150 ono

-Stock r33 suspension with stock springs-complete set

$100 ono

-Stock VGC series 1 r33 spoiler-original burgandy paint

$100 ono

post-59075-1279186687_thumb.jpg post-59075-1279186699_thumb.jpg post-59075-1279186734_thumb.jpg

Also have...

-MOMO "corse" 320mm all black leather steering wheel VGC

Has two lines of red stitching on the inside

A few scuffs/marks but in good condition-horn,etc included

35cm in diametre-centre of mounting holes are 70mm across & 35mm apart

$160 ono

post-59075-1280023485_thumb.jpg post-59075-1280023557_thumb.jpg post-59075-1280023634_thumb.jpg

post-59075-1280023869_thumb.jpg post-59075-1280024669_thumb.jpg

post-59075-1280024924_thumb.jpg

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...