Jump to content
SAU Community

Recommended Posts

Yes. they were the one's that were good enough to record the car's current PB of 9.38 @ 152.25mph.

I have photo's, but they are over the 100kb limit here.

If you want them, give me your e-mail address and I will forward them on.

Just going for a different setup...and I'm tired of dealing with speedshops who want your money, but don't earn it.

Yes I will separate...if you can find someone else to buy the other one.

More or less buy both and sell one or share the purchase with another.

I would have thrown one on the REX if I was going to keep it. But I've just detuned it to sell....no more coilovers, mags, APS kit etc. back to almost stock.

This is the time to meet me on the street, when it's only half a weapon....it's all good fun though....there's a time and place for everything.

Have fun, live to enjoy life.

I have a td06-20g on my rb25det and its the ducks nuts. Been for a drive in my mates gt30 equiped rb25det and it's fast too but my car pulls harder and stronger and keeps pulling to the rev limiter, 7500rpm, we are considering taking it up another 500-1000rpm :D

do you have manifolds and dumps to suit the kit? if so im intrested on the whole deal. i have a near new hks T51R kit for a gtr if you want to do a trade deal or something down the line. its made over 720hp at all four wheels out off it on 28psi so im looking for some more power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...