Jump to content
SAU Community

Fs: (vic) Various R33 Parts And Performance Parts

TUF250
 Share

Recommended Posts

TUF250 Proficient

TUF250

Posted
Posted

Hi,

Time to get rid of some of my gear thats taking up the small amount of shed space that I have. All of it is negotiable and can be posted at the buyers expense. Will do a better price for bulk buy.

Pick up is South eastern suburns melbourne

Jason 0431 286 689, [email protected]

- R33 GTST Wheels, Very good condition. Good tyres. Plenty of tread 225 rear, 205 front (stock spec) $250ono

- Stainless Steel Jap Muffler 3 inch Staight Through. Had a great note. Was part of a jasma approved system so not too loud. Excellent condition. $175 ono

- Mild steel muffler, 2.25, chambered design, great for clearing defects. Only used for a short amnount of time. $50

- HKS style yellow mushroom filter. Barely used, came with my car. Great condition. $20ono

- Standard R33 Intercooler, good condition, great for clearing defects $40ono

- Standard R33 dump pipe and front pipe, good condition, great for clearing defects $50 the lot

- Oxy sensor. Perfect working order. Replaced with new one (might be useful to diagnose a problem?) $10

IMG_1213.jpg

IMG_1214.jpg

IMG_1215.jpg

IMG_1211.jpg

IMG_1212.jpg

IMG_1216.jpg

IMG_1217.jpg

IMG_1219.jpg

Thanks

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...