Jump to content
SAU Community

Chromoly Hicas Lock Bar

TurboDoseBro
 Share

Recommended Posts

TurboDoseBro Proficient

TurboDoseBro

Posted
Posted (edited)

Hey guys, I have read on a forum topic that there are such things as chromoly HICAS lock bars. I was just wondering where to get them from so can you please point me in the right direction.

Reason being the weight factor. Poster states he removed his old bar and replaced it with a chromoly one and it proves to save a lot of weight.

Steel bar (assuming it is from the said weight): 6kg-8kg

Chromoly bar: 0.5kg

Thanks :(

Edit:

http://www.skylinesaustralia.com/forums/R3...=chromoly+hicas

Post #5 he mentions.

Edited by TyresBro
Link to comment
https://www.sau.com.au/forums/topic/330172-chromoly-hicas-lock-bar/
Share on other sites
Risking Grand Master

Risking

Posted
Posted

I've neve seen a lock bar bar the weighs 6-8kgs!

Even a solid bar in that length would not come close

reading his post I'd say his never weighed anything accuratly!

A chromolly bar can be made but will cost you 3 times as much and with the ammount of material in it there will be stuff all weight saving.

I use Molly daily for suspension and cage work, for a lock bar just buy an ordinary one and spend the money Saved on fuel!

some_cs_student Veteran

some_cs_student

Posted
Posted

Ask someone who makes the normal lock bars how much they weigh, I don't think its much more than 1kg from memory.

Maybe email a sponsor who sells it ? http://www.isc-warehouse.com/index.php?mai...products_id=247

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • joshuaho96
      Coolant leak?

      By joshuaho96 · Posted

      Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Murray_Calavera
      Quieter performance exhausts (or muffler add-on options)

      By Murray_Calavera · Posted

      Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...