Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

^^ Heaps.

intercoolers aren't exactly very technology-intensive, unlike turbos for example. the justjap ones still have a decent core, they aren't the worst ones you can buy put it that way.

that said i have a blitz CS and love it :D

I bought a JJR tube and fin cooler for my R32 Gtr built motor etc and up when i was getting it tuned when we reached the 300rwkw range with upgraded turbos -9 twins, ecu, cams,exhaust ALL the bolt on mods it started getting inefficient on the dyno couldnt take the repeated dyno runs and cool properly anymore.

i changed to a Trust tube and fin core design ive got photos of these side by side with the JJR and DAMN the end tank swept design, angles everything the way it carries the air into the cooler also looked at it with a led light the internal fin design totally different the Trust had so much more tech inside the JJR looked like a water radiator internal design the air would just pass straight through quickly instead of maybe slightly slowing down that touch to cool or what not im not sure the fins had extra bits on them like extra heat sinks to carry heat away etc etc.

The Trust was so much more superior in all these aspects just looked like that it had the R&D and i gladly had paid for money for this.

Well back on the dyno getting it re tuned with the new cooler straight of the bat the car intake temps were completely different when repeatedly being pushed hard on the dyno.

This time i max the turbos out not the cooler efficiency.

Im no hardcore mechanic ive built a tough 362rwkw GTR slowly and ive tried my fair share of chinse parts. All i can say what ive said above is true i witnessed it and it may not be the case with someone else but god damn it cools way better and has been since the last 3 yrs.

Im not saying JJR coolers are bad in anyway this is my experience i had and i WILL stand by the jap products and this is also with any suspension components as well this is another story and boy the difference their is noticable as well.

All the best guys what ever works for you is great but i love the quality of the jap products and i didnt build my GTR with the scope of scimping on the parts that really count and cooling is major so i addressed it as best i thought possible.

cheers,

Dave

who knows probably not i guess the standard GTR coolers are good for at least 300rwkw ive been told but but unless you are able to meter it like dyno runs repeatadly and check intake temp readings and change who knows mine was coincidence as i bought the JJR cooler just because i had already upgraded everything else so this seemed logical to do.

Just so happened that the whole hot intake charge episode happened to me so i addressed this and lucky enough and more money later got it re tuned and Wallaa!!!, i was in the business car tuned and intake temps beautiful.

id say for power under this the JJR cooler should be fine no probs at all.

cheers,

Dave

Just curious, exactly how much does a PWR intercooler kit cost for a r33?
^^ Heaps.

intercoolers aren't exactly very technology-intensive, unlike turbos for example. the justjap ones still have a decent core, they aren't the worst ones you can buy put it that way.

that said i have a blitz CS and love it :domokun:

i paid 930 ish for a custom pwr

630x320x140

piping will be custom when the engine goes in.

i dont find this alot at all compared to some, i had an arc cooler on my s14 (when i bought it) and the seller said it was 2800 or something

coolers are actually quite technology intense although the basic priciples are air goes in and cools, down the design of the fins, bar, plate, end tanks, cooler piping etc is all very important when it comes to cooling charged air temps. if u have ever looked thru the end tanks of a jjr or saber (or any other china brand) then looked thru the tanks of a jap or other high end brand u will see the difference, when i get a chance i will show a pic from my pwr one and a saber one i have lieing around for ur comparison

Gun metal is actually quite true.

In saying that, If you were going to really pushing to get big numbers, its just sensible to put some decent cooler, not just a cheap china copy, as when you're pushing your motor, even the simplest of design flaws can magnify and really effect the performance.

When I was in the market for a fmic, I couldnt source a gtr one cheap enough, so ended up getting a HDi GT spec tube/fin one. Had it delivered to my door for around $450 NZD.

Its good to do alot of reasearch before you buy car parts - which is what you're doing - is great.

Edited by Ultimategtr
Gun metal is actually quite true.

In saying that, If you were going to really pushing to get big numbers, its just sensible to put some decent cooler, not just a cheap china copy, as when you're pushing your motor, even the simplest of design flaws can magnify and really effect the performance.

When I was in the market for a fmic, I couldnt source a gtr one cheap enough, so ended up getting a HDi GT spec tube/fin one. Had it delivered to my door for around $450 NZD.

Its good to do alot of reasearch before you buy car parts - which is what you're doing - is great.

Did I read that properly... "not just a cheap china copy" "so ended up getting a HDi GT spec tube/fin one"

Sorry mate, pretty sure HDI are made in China

Did I read that properly... "not just a cheap china copy" "so ended up getting a HDi GT spec tube/fin one"

Sorry mate, pretty sure HDI are made in China

hdi r hybrid copy's i believe from memory and they r piece of shit. wont take more than 280+.

i figure if ur going stock turbo then it doesnt really matter that much but if ur going after market turbo and stuff then definately go for a jap brand

hamish (joeyjoejoejunior....) runs a HDI.. and is making 300+rwkw. depends what the OP wants i guess

also, Julz.. is your facebook photo a pic of your car? lol i think i found you on a mate's bday event

yah buddy

white r34 with a carbon bonnet in a dimly lit garage with shit piled up 2 feet past my car...then yes add me if u like mate.

which mate is it??? lil george?

hdi r hybrid copy's i believe from memory and they r piece of shit. wont take more than 280+.

i figure if ur going stock turbo then it doesnt really matter that much but if ur going after market turbo and stuff then definately go for a jap brand

HDI is Hybrid (Hybrid Development International)

Furthermore, the bulk of the cheaper intercooler cores all come from the same factories and have proven time and time again that they can handle over 300rwkw, so in the interests of helping other members, lets not confuse your personal opinion, with facts here, because for most street/mild applications the cheaper intercoolers work just fine.

Edited by R33

Hey guys, im in the same boat, looking for a new front mount.

Im not chasing massive power so i was lookin at either the blitz se/cs or the greddy ls. Heard good things bout the blitz re value for money.

What u guys reckon?

http://www.nengun.com/search/#g:1;c:74;m:1;t:n:u

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...