Jump to content
SAU Community

Recommended Posts

Had my 03 v35 auto coupe for about a month now. Great car, and a very smooth drive :D

Picked up on noises lately that I wasn't sure about.

First is at cold crank (usually overnight). Sometimes I get a rattle/crank noise when I start. I'm guessing this is an oil pressure problem of some sort? Rare to occur, but always in the morning. Only noticed it twice in the last week.

The other noise is a ticking noise in reverse only? This isn't the infamous axle clicking problem is it? Fairly light noise, only when I engage reverse and turning into a park. Sounds like its coming from the front. It's a similar sound to CV joints failing in fwd cars (but a hell of a lot fainter)!

The third noise has been deemed normal (thank god). The one when you first take off in D and get a funny noise once you reach 20kmph.

I'll have to try and record these noises at the right moment!

The rattle crank noise you are hearing is probably the starter, the spur gear not withdrawing from the ring gear in a timely fashion, hence the noise, mine does it and I'm not concerned.

For the other noise you are hearing I have no , could possibaly be as simple as a l stone caught in your tread, but I would get it checked out to be sure.

Had my 03 v35 auto coupe for about a month now. Great car, and a very smooth drive :(

Picked up on noises lately that I wasn't sure about.

First is at cold crank (usually overnight). Sometimes I get a rattle/crank noise when I start. I'm guessing this is an oil pressure problem of some sort? Rare to occur, but always in the morning. Only noticed it twice in the last week.

The other noise is a ticking noise in reverse only? This isn't the infamous axle clicking problem is it? Fairly light noise, only when I engage reverse and turning into a park. Sounds like its coming from the front. It's a similar sound to CV joints failing in fwd cars (but a hell of a lot fainter)!

The third noise has been deemed normal (thank god). The one when you first take off in D and get a funny noise once you reach 20kmph.

I'll have to try and record these noises at the right moment!

That is due to the oil pressure not building up fast enough to tension the timing chain's hydrulic tensioner. Reason why it happens in the morning is because most of the oil drains to the bottom of the engine. It's not an issue I'd be worried about - as long as the sound dis-appears stright away - if the sound is constant you could be using incorrect oil/time for an oil change or could mean an issue with the tensioner.

You might want to check the oil grade - I think the V-Series use 5w-30 oil.

For the ticking noise, maybe is the ball bearing of the wheel cause it, mine got the same problem, and will check it on monday... the garage guys said that 10 out of 8 customers with 350z or 350GT got the same problem. not expensive to fix.

I sometimes get the startup rattle as well on my 03 V35 coupe and could be caused by the VTC sprocket (gear for the Valve Timing).

From what I've read, it doesn't cause any damage to the engine and is mainly a noise issue.

As Iseekool has mentioned, an oil change should help.

if its a single click when reversing...then its the rear axle ...needs to be greased and rotated

otherwise if its a series of clicking noises...my guess would be brakes or wheel bearing

Hay, just got my V35 checked this afternoon, about the rear ticking noise, the mechanic disassembled the rear wheel rotors and check the wheel bearing, he's spotted nothing and i replace my rear brake pads and machined the rotors...

the noise is still there...=.= he said the car is mechanically okay maybe the shape of my 370Z 18'' wheels that i put on produce the sound by stirring up the air...so the (ticking like) sound appears at a slow speed but disappear later? i don't understand it.. so.. nothing solved LOL....

Anyone else got the same problem?

  • 1 month later...

Thought I'd update this. I've worked out that the reverse ticking noise only occurs when you ride the brake in reverse while turning the wheel (ie. Parallel park). Wierd! If I reverse without riding the brake, all is fine (still turning the wheel of course)...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...