Jump to content
SAU Community

Wtb: Dr30 Front Passenger Side Gaurd

masTers
 Share

Recommended Posts

DR JOSH Community Regular

DR JOSH

Posted
Posted (edited)

I have 2 aussie spec gaurds on the front of my DR, the only difference I found with them was the holes for the badge and the holes for the pod of the DR body add ons, which was as easy to change as drilling 3 small holes.

Never understood why people pay so much for DR gaurds, mine cost $20 each for mint ones from the wreckers

Edited by DR JOSH
  • 2 months later...
Ghostrider Grand Master

Ghostrider

Posted
Posted
Slightly hard from WA

Wish we still had our PickAParts in WA, but the land value in Welshpool where the big one was would be worth probably 1.5 million now :banana:

That's an interesting call, because the area Dapto is on would be worth 10million today, easy.

Getting a guard in mint condition isn't the issue, the issue would be getting it to WA in same condition. It could be insured but that just gets your money back, doesn't get the guard you need.

Wouldn't it be easier getting it through your local Nissan dealer? They could order it through the FAST system, ex Japan and you would be assured of it's condition when you picked it up?

Cheers, D

Ghostrider Grand Master

Ghostrider

Posted
Posted

Steve, Standard guards are fairly easy to come by, but your mint order is the hard part. To ship to WA from Sydney would be expensive too. If there was some small blemishes you would have to get the beater to fix it before painting.

Have you tried contacting Carolyn Kruger (Cazz) for a price on a new guard, she says she can get new bits at good prices.

D

masTers Mentor

masTers

Posted
  • Author
Posted

Was hoping for something just straight with the correct indicator. I nearly bought interstate twice but both had the wrong indicator.

I am also considering sucking it up and getting the Jenesis FRP gaurds, but thats a last resort.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...