Wtf

[pork hunt drifting]

Picking one up on way home tonight. $3.00 from grand Nissan.

Can't test it untill I get new turbo on now

[pork hunt drifting]

http://www.horsepowerinabox.com/HPIAB2/prod641.htm

I might order one of these tomorow what yas think of price and size I don't care about lag

[wolverine]

http://www.horsepowerinabox.com/HPIAB2/prod641.htm

I might order one of these tomorow what yas think of price and size I don't care about lag

Do not buy that one.

If you are going down the route of a GT3076 then you will need a T3 flanged (not T25 SR20 type exhaust flange).

I would sit down and have a really good think about what you want out of a turbo before acting as you will save money in the long run by thinking it through.

I am not a fan of the turbine housings that bolt up to the stock dumps as I have never seen them allow the full potential of a 76mm compressor.

If you go down the path of a complete Garrett unit then you need to consider dump, oil/water lines, intake changes and you will need new injectors even with the correct HPIAB GT3076 with T3 flange there are still issues with oil/water line and intake changes.

[d1_drifter]

If you're thinking of that exact one in the link, then don't do it. It's in a T25 flange and is made to fit SR engines.

Look for one that is in T3 flange

Edit: Dammit, beaten

Edited August 2, 2010 by d1_drifter

[pork hunt drifting]

i no its not that one i need but morrie at from that place says he has the one for rbs and the oil n water lines arnt much of a hassle. and im doin the exuast to suit so that doesnt matter.

i was gona get him to fit it so he can deal with it but now i have the motor striped down i was gona do it myself and just give it to him to tune.

i want to spend about $1600 to $1800max just on turbo.

if yas wana thro ya sugestions down go for it. just remember lag doesnt bother me, so must be in the 30s

[d1_drifter]

Is there a specific power figure you're after?

What is your total maximum budget?

[pork hunt drifting]

cars got 200wkw now with fmic pod no rear muffler and nistune set at 14 psi (droping to 9)

want to get 250wkw with

new turbo $1600

fuel pump $150

afm $200

exhaust$800

if injectors can handle it il do them later and what ever else to get 300wkw

[pork hunt drifting]

Cum on guys should I get the 3076 to suit rb for $1800?

I wana order tonight so can put togetha on weekend

[wolverine]

What more do you want to know?

I would buy the 0.82 Garrett turbine housing and appropriate dump if you want to make 300rwkw down the track and buy the injectors now as well as the other stuff.

[pork hunt drifting]

Ild be happy with 270 to 280 if that's about all that turbo can make I'm just Gona run it at what Eva the injectors can handle for now untill I get more coin. The exhaust and other bits are Gina send me broke for a while

[wolverine]

If you are going to spend on retuning then why not do it once it will cost you later anyway.

The injectors and the stock afm will be a major limiting factor with that turbo. Maybe around 220rwkw.

[pork hunt drifting]

I'm doin afm. What are injectors gona cost me

[pork hunt drifting]

Trying to pay mortgage on one wage at moment so budget isn't looking good for injectors.

Has anyone got sum of that metal paste stuff I can steal so I don't have to buy a $50 tin of it?

[KiwiRS4T]

You won't need the afm if you don't change the injectors. Save the money for your turbo - total installation costs will be more with bits and pieces. Also I think fuel pump will cost more than $150 and afm will be $300.

Just do the turbo and fuel pump for now. What are you using for boost control?

[pork hunt drifting]

Manual valve. I only want one setting so ebc doesn't bother me

[pork hunt drifting]

Just got Garrett 3076 .82 $2000 getting full exhaust $1100 and fuel pump $150. Injectors and afm will have to wait.

Edited August 5, 2010 by pork hunt drifting

[pork hunt drifting]

Has anyone fitted a 3076 or sumthn simaler. Just wana no what you've used to custom the piping etc