Jump to content
SAU Community

Recommended Posts

I have a Eonon - EO859 that came with my GTT, but it randomly drops radio and "seeks". I have taken it out and checked the aerial but all looked fine. Not sure what else to check anyone help me out.

Here is a link to the unit - http://rsonlineshop.com.my/Spec/New/859.htm

Thanks for reading.

Link to comment
https://www.sau.com.au/forums/topic/331362-eonon-dropping-out/
Share on other sites

I have a Eonon - EO859 that came with my GTT, but it randomly drops radio and "seeks". I have taken it out and checked the aerial but all looked fine. Not sure what else to check anyone help me out.

Here is a link to the unit - http://rsonlineshop.com.my/Spec/New/859.htm

Thanks for reading.

most of the time its going to happen with any radio, multipath is a huge problem with "Nissan diversity antennas" they suck ass on a good day

before blaming the radio I would look at the antenna connection, most are hacked up when they bring them into OZ. to put on freq.converters. and without a good ground plane refuse to get a decent signal. or they might just have a loose jack ? setup on local or distance switch ????

you can get a stick on grid antenna similar to the rear defroster grid for a replacement or go old school and get a EVO,BMW,MERC roof mount instead ?

Hey troy thanks for the reply. The antenna on the back on the unit looks very clean and untouched. Im not quite sure what else to look at / for.

most likely the antenna in the rear de- mister area then or mutipath from nissan diversity antenna idea (worthless) in adelaide, if your unit has a local distance button put it on local in town?

where in town does it happen? expressway ,airport, cbd ?????

Randomly everywhere, usually around overhead wires etc

if you have access to a old school type antenna (metal rod type) to test it with, like old ford one, plug it in and prop it up in the seat I can just about bet the one in the rear window is stuffed, most suck

even a newish mitsu VRX I drive around sometimes with a top of the line factory radio, and roof antenna does that same thing , around Adelaide. my old top of the line Pioneer did it in the R34 as well. but found the wires hacked from importer and rear ones disconnected off GPS unit in rear pillar.

don't throw the radio out yet, the antenna needs a ground plane to work right. what part of town do you live in down south ? might try amplified hidden model instead ?? or if your around one night at villi's look at it for you?

Edited by sapphiregraphics

Hey troy, live west ish (Flinders Park) I maybe able to make it to villies this Friday depending on my missus going to a party. Be awesome if you could look at it.

I don't have a spare antenna anywhere either unfortunately. When i start the car im not sure but it sounds like an aerial extending but that could be a completely different component ;)

http://cgi.ebay.com.au/D2203D-Eonon-7-DVB-...=item5d2a5f2f3c

this is the one i have and i love it (never had a problem with it ) but you wont find a digital areal to get the tv working with all channels :P

it would be a cheap upgrade for you

http://cgi.ebay.com.au/D2203D-Eonon-7-DVB-...=item5d2a5f2f3c

this is the one i have and i love it (never had a problem with it ) but you wont find a digital areal to get the tv working with all channels :P

it would be a cheap upgrade for you

the noise you hear is the ABS brakes running a test on the line pressure when you first drive off. 10-15 seconds after moving forward. on the GTT

I have a cheap upgrade antenna for Digital tv. lol works a treat but needs some fiddling to get it sorted.

thanks for the buttons to push for local/ distance

due to prior commitments I have been volunteered to go out to eat friday , so villi's is out mate. sorry.

I live 15 min from noarlunga , in the dirty south...lol

ok well the second thing to check (common problem ) is that they havend uses a metal bast tint on your rear window as this will affect your reception , also the adapter plug used to run an aftermarket radio tend to fall apart once pluged and unpluged a few times .

good luck .

also most eonon's are utter crap theres only 1 modle i have found to get worth its money !! the first and second ones i had were shit and the third was great !! the last one i just got for the wife is newer but alot harder to navigate the menues and settings but works fine

ok well the second thing to check (common problem ) is that they havend uses a metal bast tint on your rear window as this will affect your reception , also the adapter plug used to run an aftermarket radio tend to fall apart once pluged and unpluged a few times .

good luck .

also most eonon's are utter crap theres only 1 modle i have found to get worth its money !! the first and second ones i had were shit and the third was great !! the last one i just got for the wife is newer but alot harder to navigate the menues and settings but works fine

they do have support if you bought from one of the bigger sellers , and MSN to discuss any issues live.

had one that had out of date test maps, they FTP'd me the new version , no drama's

the plug above causes most problems or hacked installs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...