Jump to content
SAU Community

Squeaking Clutch

NRV155

By NRV155,
in General Maintenance

 Share

Recommended Posts

NRV155 Proficient

NRV155

Posted
Posted

Hey. Just wondering if my clutch might be going shortly or not? It squeaks most times and the release point in the pedal is very high.

Anything to worry about?

Also can someone post a link to the thread about the air con control lights and how to change them please? I cant seem to find it (even through search bar).

Link to comment
https://www.sau.com.au/forums/topic/331946-squeaking-clutch/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

if it squeaks when you push the pedal in then it could be 1 of 2 issues. 1 is the bracket where the pedal mounts under they dash. the other is the pivot bolt inside the gearbox. the first issue is the easiest to check and fix. the second is relatively easy to check, but much harder to fix as the gearbox has to come out

mad082 Grand Master

mad082

Posted
Posted

if the pivot bolt is damaged in anyway then the next time you press the clutch pedal may be the last before it gives out and you lose all use of the clutch. when mine broke i pushed the clutch in and it felt funny, so i let it up and did it again. it still felt funny. i let my foot up and the pedal got nearly all the way back out before it shot to the floor. i could pull it back up by hand but the clutch didn't work.

LatinR33 Experienced

LatinR33

Posted
Posted

I had the same issue on my old R33. It was the clutch fork which needed to be lubricated.

Squeaky when pressing and releasing, very annoying. Grabbed a can of motorbike chain grease and sprayed in the plastic flap where the fork is located. Annoying problem solved and cost me $6 to fix =)

  • 1 month later...
SKITTLES Experienced

SKITTLES

Posted
Posted

bunny-thread-relevant-to-my-interests.jpg

if it squeaks when you push the pedal in then it could be 1 of 2 issues. 1 is the bracket where the pedal mounts under they dash. the other is the pivot bolt inside the gearbox. the first issue is the easiest to check and fix. the second is relatively easy to check, but much harder to fix as the gearbox has to come out

Mine has a squeaking sound audible from outside the car, which isn't all to audible for me but I don't like it being there :P

I'm assuming it's the pivot bolt. Where abouts should I look for that and do I need to take the gearbox out to greese it up?

SKITTLES Experienced

SKITTLES

Posted
Posted
you can fix the squeaking pivot bolt without removing the gearbox. you simply spray something like a spray grease in through the opening around where the clutch fork goes into the gearbox.

WD40 sounds like it'll do the trick :P

I had a mechanic do that on my Excel once but the squeaking soon redeveloped.

Is a lack of lubricant the only thing causing the squeak?

mad082 Grand Master

mad082

Posted
Posted

yeah it is. also wd40 is too thin, so the noise will come back after a few weeks/months. something thicker like a spray grease, motorbike chain lube, or even just a blob of grease on the end of a long screw driver (and then a small piece of wire to work it into the right area) will be better than wd40. wd40 isn't really a very good lubricant.

SKITTLES Experienced

SKITTLES

Posted
Posted
yeah it is. also wd40 is too thin, so the noise will come back after a few weeks/months. something thicker like a spray grease, motorbike chain lube, or even just a blob of grease on the end of a long screw driver (and then a small piece of wire to work it into the right area) will be better than wd40. wd40 isn't really a very good lubricant.

Any specific type of lube you recommend? I'll pop into supercheap or something on the way home.

  • 1 month later...
SKITTLES Experienced

SKITTLES

Posted
Posted (edited)
if you go to advanced search and search for posts about the pivot bolt and my name you'll find a pic i posted about it

Thanks Hugh. I haven't had a chance to do it recently, and I went to do it the other night and it wouldn't make the sound (it's a bit hard to work out where the sounds coming from when the sound isn't being made :whistling: )

If I get home by a reasonable hour tonight, I'll have a look...

For future Googlers

here is the picture. the pivot bolt is about 2 inches in behind that soft bit.

the picture is taken from the drivers side. if you stick your head under the car just behind the front wheel that is what you'll see.

post-70785-1291067039_thumb.jpg

Edited by SKITTLES
SKITTLES Experienced

SKITTLES

Posted
Posted
Thanks Hugh. I haven't had a chance to do it recently, and I went to do it the other night and it wouldn't make the sound (it's a bit hard to work out where the sounds coming from when the sound isn't being made :blink: )

If I get home by a reasonable hour tonight, I'll have a look...

For future Googlers

Further noting, it's on the drivers side of the gearbox, there's a medium, square rubber grommet... just pull it out on one side and move it out of the way.

I sprayed some WD40 in and it fixed it.. but give it a week and it'll come back..

What part in particular am I supposed to lube??

What should I be straining to look for? I can only really see a black single bolt.

mad082 Grand Master

mad082

Posted
Posted

you should see the clutch fork sitting on that bolt. that bolt has a mushroom shaped head on it and the clutch fork pivots on that. you need to lube up the top of the pivot bolt. you just have to spray a heap of lube onto the area and then continuously push on the clutch to work it into where it needs to be

  • 3 weeks later...
  • 4 months later...
kevlo948 Contributor

kevlo948

Posted
Posted

sorry to dig up and old thread but im a little confused.

My clutch squeaks when i press and release it and im trying to diagnose why.

I'm looking under the dash to find the bracket that may] need greasing up but im not sure where exactly i should be greasing.

post-82442-0-51532500-1305540476_thumb.jpg

where should i be lubricating??

any help would be greatly appreciated!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • Dose Pipe Sutututu
      Unpeeling the Orange

      By Dose Pipe Sutututu · Posted

      When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Dose Pipe Sutututu
      RB20DE NEO smallbox clutch.

      By Dose Pipe Sutututu · Posted

      Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...