Jump to content
SAU Community

R32 Starting Problem

matizman69

By matizman69,
in General Maintenance

 Share

Recommended Posts

matizman69 Rookie

matizman69

Posted
Posted

Hopefully right section

I have just done my Water pump and timing belt, spark plugs and coil packs and now my car wont start. It was going but while driving it just died. Didnt snap the timing beelt and the battery was working as well as the alternator. fuel pump still works and all 6 coil packs have sparks. im not sure what else it could be any help would be great cheers guys.

joel

Link to comment
https://www.sau.com.au/forums/topic/332013-r32-starting-problem/
Share on other sites
Moodles2 Grand Master

Moodles2

Posted
Posted

I think it's the CAS, try taking it off and checking if the key locator still freely spins. I know from experience if it's not absolutely perfectly flush when you put it back on you can ruin a CAS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Chris' Toyota Mark ii JZX110

      By soviet_merlin · Posted

      I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
    • GTSBoy
      98 R34GTT 4k engine stumble

      By GTSBoy · Posted

      It's either an ignition failure or a fuel failure.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • Piggaz
      Why am I hitting a power wall with my stroked RB25?

      By Piggaz · Posted

      The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
×
×
  • Create New...