Jump to content
SAU Community

Recommended Posts

Item:

RB20DET, re-built motor, mildly worked.

Location: Sydney

Website: here and other forums

Item Condition:

Motor was running fine before removed from my car, Inspections are welcome.

Reason for Selling: I would like to go down the path of building up a RB26/30 motor. Motor has been removed from vehicle and now taking up space in my garage.

Price and Payment Conditions:

RB20DET, re-built motor, mildly worked - $1000 firm

Pick-up prefered.

Info:

The RB20DET, re-built motor, had the following work done to it, as stated below:

RB20DET Block

MACHINE & SERVICE CYLINDER HEAD

3MM STEAL HEAD GASKET FITTED

GENUINE NISSAN ENGINE FULL CYLINDER HEAD GASKET KIT FITTED

VALVE LIFTERS REPLACED

GENUINE NISSAN MANIFOLD GASKET FITTED

GENUINE NISSAN OIL SEAL FITTED

GENUINE NISSAN ROCKER COVER GASKETS FITTED

GENUINE KEY WAY CRANK SHAFT FITTED

GENUINE NISSAN TIMING BELT FITTED

GENUINE NISSAN CRANK SEAL FITTED

RECONDITIONED FRONT CRANK SHAFT PULLEY FITTED

GENUINE NISSAN THERMOSTAT FITTED

Motor setup, fitted with the following parts (please take note these bolt-on parts are not provided in the sale) Garrett 3540 Turbo, 3" exhaust system, front mount intercooler, Microtech LT10 ECU tuned on 19psi made 238.3kws (Can provide the print-out of the dyno sheet for proof).

Receipts for the re-build can be provided aswell.

Please note:

The motor is sold as is pictured. The turbo and oil lines (for the turbo) are not provided with the motor.

Pictures:

DSC03166.jpg

DSC03169.jpg

DSC03170.jpg

DSC03171.jpg

DSC03165.jpg

DSC03164.jpg

DSC03163.jpg

Link to comment
https://www.sau.com.au/forums/topic/332447-rb20det-re-built-motor/
Share on other sites

Price dropped to $600 firm.

bump!

hi could you please text me on this number 0405232544 when you get this, just say something about the engine in the text, i am interested

hey mate just wondering if you would consider posting at my cost to 3136? i could organise it

PM sent

what does it compression test at ?? people will always be interested in this !!

I will take this in consideration, will post the details shortly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...