Jump to content
SAU Community

Recommended Posts

I would take a stab that it's a Jap cage - if so, almost 99% of the time the answer is a NO.

Cages for registered/road going vehicles need to be built within the specs of your states laws & ADR's, and signed off etc etc.

So basically no Jap cage will ever pass as they have too many bends, come to close to your 'head space' and similar other issues.

Given a half cage, legal, is only around $1000 installed... Bemuses me why people pay $600 for a jap cage that isn't legal or as safe :)

hey yeh its not a jap one its from a mob in Brown Davis Automotive Pty Ltd. 47 Holloway Drive, Bayswater, Vic 3153,

Australia but i was wondering is a 4 point cams approved roll bar able to enter into drifting dayz coz my understanding was that u needed a full cage??

((((((Jake hi,

Thank you for your enquire.

Our kit 4 point CAMS approved roll bar for the 33 is roadworthy in WA. It fits

completely behind the front 2 seats. All rear trim can be retained but it makes

the rear seats unable to be used. The roll bar include a harness mounting bar

for the shoulder straps of racing type harnesses. They come complete with CAMS

paperwork if requested and are finished in a satin black powder coated surface

to match the trim.)))))

Ye i know Brown Davis well, cheap and excellent quality on all the cages I've seen them put together.

You'd need to check the reg's of the drift days in your state.

If it is fully blown competition, you'd probably need a full cage.

However if its club/non comp level type drift day stuff you can get away without a cage here in Vic, let alone a half cage.

since most drift events are run under cams and most are considered a 'non speed' even and can be entered on a L2NS licence you usually don't need any cage. I'm not sure if the rules have been changed now (there has been talk for a long time) but last I checked even in national level drift comps you were NOT required to have any cage so even a jap cage was ok as long as the scrutineer was happy with it and most were on the logic of some cage being better than none.

but certainly a brown davis 4 point will almost certainly be cams compliant and then it's just a matter of the regs for the event you are entering in. but as above 90% of drift events don't actually require any cage at all.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
    • But if you had to go bury a body in the forest, would you not put that in the boot? Most of them are >=90kg these days.
    • That could easily make a horrible noise. +1 to the benefits of: a) Disclosing all relevant information when asking questions such as these, b) Actually going out and having a look at your own car, seeing as you're the one there, and we're not!
×
×
  • Create New...