Jump to content
SAU Community

Recommended Posts

Found what i think is the knocking noise under my stagea..

anyone know what is good to replace these bits? the black rubbers look slightly flogged out.

post-31456-1281582017_thumb.jpg just near the steering rack..

hey

not sure wether its the same but on ours we had a knocking sound when going over bumps turned out to be the sway bar link arms and if thats what the prob is northshore prestige are good for parts

i dont want to put that rubber rubbish back into it. its weak and will do the same thing again, was looking for more a replacement nolathane etc?

are the front arms on the stagea similar to anything else nissan have? xtrail 350z etc?

hey

not sure wether its the same but on ours we had a knocking sound when going over bumps turned out to be the sway bar link arms and if thats what the prob is northshore prestige are good for parts

sway bar Links to the lower control arm?? could be right. they did however look to be ok. but i am getting the same noises as you describe.

would like it fixed so its perfect for the next buyer if someone ever does come along to buy it

sway bar Links to the lower control arm?? could be right. they did however look to be ok. but i am getting the same noises as you describe.

would like it fixed so its perfect for the next buyer if someone ever does come along to buy it

I had a knocking noise in the front end when weight cam on and off the front left corner.

turned out to be a loose nut on the swaybar mount that holds the bush. It felt tight and even with a bar would not move but put a socet on it and tightened it and no more noise.

worth a check before you spend money.

sway bar Links to the lower control arm?? could be right. they did however look to be ok. but i am getting the same noises as you describe.

would like it fixed so its perfect for the next buyer if someone ever does come along to buy it

post-57665-1281627838_thumb.jpg

thats the bit that was our prob not the best pic shoulda got 1 from other side to but you should be able email nothshore prestige if it turns out that is ur problem about $75 per side

and if you have a pedders near you $14 for a full inspection and they will tell you exactly whats wrong

Mine makes all kinds of suspension noises when driving up driveways lol.

She's heavy so i put them down to weight factor lol

Nissan havn't tried to sell me any expensive arm set-ups or anything so I'll assume it's not something major that they could profit off, or they would have taken the opportunity!

On that note, the old girl goes in for a 100,000km service at Parramatta Motor Group on Wednesday.. woo hoo! happy birthday

On a side note, I'm planning on treating her to a beauty treatment at Seven Hills Detailing Centre as part of her birthday present.. I was umming and arrring due to the front quarter panel (p plater incident) and the drivers door (some c*n# with a key or something similiar in a carpark), but decided it might bring the rest of the paint up quiet well and will keep her looking good for a few months.

Anyways, my rant over :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...