Jump to content
SAU Community

Recommended Posts

Hi to all,

Finally, just got my v35 250gt last thursday. I've been observing it for a week now, so far it's all good. There's just this one thing bothers me about my breaks. The car vibrates a little bit whenever I slightly step on the break pedal to slow down coming off from 80-100 kph.

Is this normal? Anyone had the same experience before? Am I just making a big deal out of it? Coz the car drives awesome and the breaks are working really well, except only for that little vibrate thing that I'm worried about.

Any suggestions and recommendations of what to do would be big help for me. Thanks!

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/
Share on other sites

before you shell out your hard earned chasing the worst case scenario, consider giving them a light skim with some wet and dry then a clean with brake cleaner. You may find some pad resin has been left on the disk surface from poor braking habits. This happens when the foot is left on the pedal when the brakes are very hot. If this doesn't cure it then they may need a machine skim. There are plenty of mobile brake mechanics that can do this without removing the disks.

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5398209
Share on other sites

Me too have a vibrating brake before on a 4WD, and I found out there's a hair line crack on it. Have to change the whole disc. I was told maybe the crack was due to sudden cooling of the disc. Like after a heavy use, car was send to a car wash where the water jet cooled the disc too fast.

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5398815
Share on other sites

+1 for a rotor issue, (most likely warped), as it's the only issue (other than an ABS fault) that will cause vibrations under braking. Does it get worse when the brakes are hot?

Not really, it only vibrates for 1 to 2 seconds if I slightly step on the break pedal and only if I'm driving a bit fast.

I'm thinking if this is a serious problem, I might bring it back to the car yard I bought it from and get it fixed.. Can I still hold them responsible for any problems with the car? Since it's only been with me for a week now and because they told me that it's been complianced so I don't have to worry about anything. Is that possible?

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5402052
Share on other sites

It came with a warranty yeah? Depends on how good the dealer is, as a rotor problem (if that's the case) could be dismissed as normal wear and tear. Only 1-2 seconds? Does it then go away completely or just become really faint?

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5402137
Share on other sites

I think it does come with a warranty. Well, it should be.. It doesn't get any worse after those few seconds. It's hardly noticeable tho. But I better get it fixed before it cause me bigger problems in the future.. I'll ring up the car yard tomorrow. Thanks guys for the help. cheers.

Link to comment
https://www.sau.com.au/forums/topic/332745-brake-issues/#findComment-5402331
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...