Jump to content
SAU Community

Recommended Posts

have a mate pulling a 2.5lt one down. engine/driveline is already gone.

if you are interested - post up what you want off it. car is in nagoya. bits will load on the next container out.

Link to comment
https://www.sau.com.au/forums/topic/332899-anyone-need-35-sedan-bits/
Share on other sites

nick,

1.have that comng already.

2.unsure of colour - its and 03/04 model - front left hit. - will check.

3. do not think its bose. - will check

Son,

I'll grab that. do you want the whole thing?

it is easier if I get he whole shelf. its not really pick a part wrecking as I can ask for various bits but they usually come as an assembly. Basically I get one shot at the car before it goes to the crusher.

Oh ok no worries!

Anyway my car is 2005 S2 sedan and does the 03/04 3rd brake lights are the same?

Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

Grill.jpg

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

Edited by R6n350GT
Maybe going to buy a V35 Coupe Manual.

Its non Navi but top glove box has the blank cover missing from the optional navigation dvd drive - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

need more detail on the 'gear changer' :)

have a non navi panel - when you buy the car we can talk the sphincter of the universe.

Maybe going to buy a V35 Coupe Manual. Would like to know how much a few things are to replace to negotiate in price.

Its non Navi but inside top glove box has the blank cover missing from the optional navigation dvd drive, its just a big hole atm - you have this?

Also the gear changer is bit worn, would love to change it to better looking one as the plastic is peeling off - how much for this?

With the air induction - it no longer looks like this

The grill to collect air is not there and the air box is not there, just has a pod filter on the end of the hose.

Should i care about this?? when looking where the box was you can just see the drain hole..

Also the right hand side window when your in the car goes all the way up and into the sill. But

1. when you open the door the window comes down (as it should) and when you close it, does not go back up

2. when you hold down the button to put window up or down it doesnt automatically do it itself

3. when the door is open the button will not make window go up or down

Do you have the mechanism to fix this? the guy said some japanese parts place near south port quoted him 20-30 to fix...

Oh also the little plastic cover that goes over the screw in the inside left door handle - need that

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

didnt see the rest of this:

1,2,3: motor or calibration. if motor I can get them. if calibration thats easier. again when you get the car we'll talk the sphincter of the universe.

trim item inside door handle - always missing - $5 part from nissan.

Thanks Chris,

Meant to say gear stick knob not changer.

Gearstickknob.jpg

How do we know about what i need for window ?

As for the trim, save me going to nissan can u also get this?

Also for the other question re: cold air induction cover and box, should i leave as is or ?

Be great if you can PM me some prices, just so i know how much i barter with the seller.

Cheers

Edited by R6n350GT

knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

Edited by Chris Rogers
knb would be better off new ex nissan. anything I lay hands on in that area is going to be worn.

I can lay hands on 90% of the small bits on that car. if they are big bits I have to get a mate involved and that costs money.

window is likely to be a motor. since you are in QLD - where?

In Gold Coast, Robina.

For big stuff can come down to Brissy.

Any advice on what kind of price i need to try and save on the car to pay for these fixes?

Glad i got you close by when i start all these mods!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...