Jump to content
SAU Community

Recommended Posts

I've had my R33 for two weeks now and have come across a problem. Over the last 4 or 5 days it has become harder to start. Each time more so than the last. When it does start, it idles smoothly with no other hiccups throughout the rev range. I am the first owner of the car in Oz and I am wondering if the plugs are still for jap fuel (100 octane) and possibly fouled. Could it also be the AAC control valve or the bi-metalic valve?

One other thing I noticed. The car will idle roughly (sounds like three cylinders) but as soon as I touch the accelerator it idles nice and smooth.

Any suggestions?

Link to comment
https://www.sau.com.au/forums/topic/33317-rough-start-up/
Share on other sites

hard to know exactly what u mean, when mines cold and i start it i notice its hesitates afew times to bring the revs on cold start idle to about 1200ish rpm if i give the throttle a touch to help it there then its fine, to me its not an issue coz i have checked everything, and its only for 1 second on cold start up then there is no drama. Just check the spark plugs if ur in doubt!!! Its not hard to do champ!! Good luck

Link to comment
https://www.sau.com.au/forums/topic/33317-rough-start-up/#findComment-668200
Share on other sites

i agree with SWEETr33 on this one

i have the 32 GTST and it hesitates a little when cold in the morning but other than those like 10secs its fine and then idles perfect.........i have noticed however my car has been of the road for 5 1/2 months now and i started it the other day and was a little worse mainly i think because of the lack of use

im pretty sure just get a set of new sparks and you should be OK

good luck

Link to comment
https://www.sau.com.au/forums/topic/33317-rough-start-up/#findComment-668232
Share on other sites

frosty it could be plugs or more than likely just the fuel has gone a little stale from sitting in the lines for those 5 months. Should be an issue when u start it up again. I remember when i went to test drive a r33 that just got off the transport truck, hadnt been started for like 8 months and its ran on 5 cyl's for about the for minute till the stale fuel cleared and it got decent fuel into it

Link to comment
https://www.sau.com.au/forums/topic/33317-rough-start-up/#findComment-668266
Share on other sites

Umm, has the battery got some distilled water in it? Harder starts are usually the sign of a battery thats struggling to cope. Especially if its come on all of a sudden.

My 32 is hard to start from cold, but its been like that ever since i got it, still no idea what causes it.

Red17

Link to comment
https://www.sau.com.au/forums/topic/33317-rough-start-up/#findComment-668401
Share on other sites

By "rough startup" do you mean it struggles to crank over or just cranks over for a long time? If the latter, it's a very common problem on many 'lines. The way I get around it is if it doesn't kick over within 2 seconds, I let go of the key, wait 1-2 more seconds, then crank it over again, and it will start within 2-3 kicks. If I keep cranking it over and it goes beyond 2 seconds, it will not start for another 4-5 seconds or so.

Recently I have adjusted the cranking ignition injector duty cycle times on my PowerFC which has pretty much fixed this problem. If you're stuck with a stock ECU then you can't fix it this way.

Link to comment
https://www.sau.com.au/forums/topic/33317-rough-start-up/#findComment-669255
Share on other sites

By "rough startup" do you mean it struggles to crank over or just cranks over for a long time? If the latter, it's a very common problem on many 'lines. The way I get around it is if it doesn't kick over within 2 seconds, I let go of the key, wait 1-2 more seconds, then crank it over again, and it will start within 2-3 kicks. If I keep cranking it over and it goes beyond 2 seconds, it will not start for another 4-5 seconds or so.

The car starts after 1-2 seconds of cranking but feels and sounds like it is running on 3 cylinders. But as soon as I touch the accelerator pedal it revs up to about 1200 rpm then settles into a steady idle. Wierd.

Link to comment
https://www.sau.com.au/forums/topic/33317-rough-start-up/#findComment-670189
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...