Jump to content
SAU Community

Recommended Posts

Hi all i bought a r32 not long back and have only done the oil change, as i do most servicing and repairs myself could somebody give me some info on servicing details.

Im currently running motul turbo lite 4100 oil, is this the correct oil to use? The 32 has 110,00k's on it and has alot of lifter noise, sounds like a sticky lifter, ive tryed some of that lifter solution you add with the oil but still ticking away.

Also i need spark plug numbers as when i went to grab some today the book at autobarn recommends platinum plugs, do i really need platinums?

Basically just need advice on engine oil and plugs as the rest is straight forward, i have read up on oils but keep getting different info.

As im picky and change my oil before 5000 k's i dont want to run the premium stuff that will cost me $80 - $90 each hit.

Any help will be much appreciated.

Cheers Andy

Link to comment
https://www.sau.com.au/forums/topic/333965-r32-servicing/
Share on other sites

I doubt id get a response as im sure its been covered but 86 pages or so of peoples opinions is abit confusing, one says this is good another says another thing. Ive figured out the plugs so can anyone give some insight into which oil would be best for my car or should i add another post to the oil section in the sticky above?

My car feels like it has a loss of power accelarating throughout the rev range ever since i chucked in this 4100 turbo lite, i tryed 3 different oils in a 3 week period thats why im asking so i can get it spot on next time instead of trying different, i tryed a penrite 10w-40, nulon 10w-40, penrite 15w-50...

Link to comment
https://www.sau.com.au/forums/topic/333965-r32-servicing/#findComment-5412445
Share on other sites

  • 2 weeks later...

Anyone got the ngk copper spark plug part number for a r32? My local autobarn seems to be confused and so am i after seeing the maintenance section of the sticky up top... This is urgent and id like to get it done today so any help will be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/333965-r32-servicing/#findComment-5432430
Share on other sites

yeh cheers guys, i got the spark plugs, just took a guess at it, as in the sticky area it doesnt specify which spark plugs are for a r32 or 33 etc... how many members on this forum? about 20 - 30 time more than my previous rides forum. Nothing like the vr4 forums, every guy is more than keen to help wether it be a simple question or a complicated one.

same as that sivilansw forum!!!!

Link to comment
https://www.sau.com.au/forums/topic/333965-r32-servicing/#findComment-5434598
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
×
×
  • Create New...