Jump to content
SAU Community

Recommended Posts

Hey

I just got a Power FC Pro in my R32 GTR, I was wondering what levels or knock are normal and what is bad.

Like whats the max level it can go to but still be ok??

I cant seem to find any info

Im running my power fc pro on bass map atm due to waiting for $$ for tune, so will my knock levels go down after tune??

If anyone can help me with this info

Thanks

M3M3NTO

Link to comment
https://www.sau.com.au/forums/topic/33417-knock-levelsreadings/
Share on other sites

This is a general FYI that should be available in a search.

The FC has a synthetic knock sensor. It is only a guide and really only as accurate as the sensors themselves.

A good reason is around 10-15 or less on load, a hot engine, all boost levels.

Older engines do anywhere from 30-40-50.

Make it what you will of motors in the 60/70+ range.

Again FYI.

My motor did a 7-8-9 before it blew.

It still does a 7-8-9 after the rebuild.

ie. I phuqqed a completely good motor but I still have a completely good motor after the new pistons etc.

T.

Your Knock levels will go down after a tune. If your car is knocking under load it could be leaning of a little. Your tuner will add some fuel at that point in the map, you can use the map tracer function your self to find exactly where in the map your car is knocking. The tuner could also retard the timing a little to reduce the knock.

Like TonyGTST said: Your knock sensor on the pfc is only really usfull when the car is idling, its main function is only to tell you if something is really wrong when first installing the pfc.

ps, when driving if you see the engine warning light come on back off staight away or you risk a blow out....

hope that helps.

We dont get Synergy in Canberra... it is Mobils high octane PULP, and its damn good (filled up my car in Sydney with it before heading back to Canberra). My car never knocks whilst driving above 3, its 99% of the time always on 1. Ive just had the engine rebuilt and its running pretty rich, which might have something to do with it.

i've hit 150 on my powerfc.

optimax is the worst fuel. ultimate is the best. i notice significant knock level differences when using the different fuels. synergy sits somewhere in between, probably closer to optimax.

i've never audibly heard it detonate.

Not this argument again. I would say that if you hit 150 knock on your PowerFC, it says more about your car than the fuel you used. I have never had a problem with Optimax. Although I only prefer it because the stations with it are more plentiful and I know where to find it cheapest. Only about 1 in 5 BP stations carry Ultimate in Sydney.

Once every BP starts carrying Ultimate I may change my preference but until then, or I strike a problem with Optimax, I will be happy pulling into any cheapass Shell I see and know that I can get 98RON fuel there.

In my area a few Mobils also carry cheap fuel until Wednesday or sometimes Thursday. If I'm out of fuel on one of those days and I see a cheap Mobil, I have no problems filling up with Synergy at 10cpl less than everyone else.

I use shell, and the max knock I got was 25 on standard boost and 63 at 1 bar, my power fc pro is untunned and running bass map till I get the $$ and some more mods

Im guessing once tuned my knock level will go down alot?

Not this argument again. I would say that if you hit 150 knock on your PowerFC, it says more about your car than the fuel you used. I have never had a problem with Optimax. Although I only prefer it because the stations with it are more plentiful and I know where to find it cheapest. Only about 1 in 5 BP stations carry Ultimate in Sydney.

i have to admit that i cannot quantify what i claim with any hard evidence - it is purely observation and i say it with the utmost unbiased opinion.

i definately see no performance difference between the 3 fuels but i can firmly say that on higher loads when fueled with BP Ultimate my knock sensor reading will remain *relatively lower* compared to the other brands.

yes it's obvious the tune is poor towards the top end of the rev range, but my argument is the powerfc tune remains constant whilst my brand of fuel is changing (and i fill up each time with a full tank) and the trend is consistent.

yes the weather and time of day is definately a variable in this equation but my argument to that is i've had too many tanks of fuels in varying weather conditions to justify this reasoning.

id definately be interested in hearing what you have to say about the car over the fuel?

cheers,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...