Jump to content
SAU Community

Recommended Posts

Nismoid the Garret turbine maps actually show the flow rates of the 0.82 GT30 and the 0.63 GT35 as having similar maximums though IMO the GT30 0.82 is the better map , these are with the T3 flanged GT30 turbine housings BTW because the 30 and 35 both use them .

True, they would be close.

However he wants to chase more power so I'd be dubious as to wether it'll get any better.

Going up 100hp in comp size/flow, but down in turbine housing size... Can be a nasty mix.

25psi is still in a respectable efficiency zone of the 82mm compressor. It's out of the most efficient zone but still ok. Peak flow here is caps out at a touch over (60lb/min) , or almost 600hp before hitting choke.

If you use 90% of that flow then it equates to 440 to 450rwhp (assuming you had a larger engine). With 25psi as you stated you should get 410rwhp.

Can a 0.82A/R turbine flow this 410hp? Perhaps. You should check exhaust gas temps as you raise boost.

You probably won't need a bigger compressor just a bigger turbine (and total flow, so you'll also need a GT35 0.82AR). I'd guess a touch under 10% more lag ~400rpm, since you are only changing the turbine side to ~15% more flow. Why not have a look at the maps using true GT35 (3582) turbos and compare.

Edited by simpletool

thats all very interesting, as we all know the old faithful 20 is not the best choice for power, but ive always wanted

to know just how much a 2o can make when its a built engine, i think the limiting factor will be the valves and ports

buts that when the nitrous will come into play.

do you think i should remove the 26 intake and tb's and go for a longer runner and larger 8omm tb option.

i had never thought about a td series turbo, always thought they were a bit old school with response. maybe a BB TO4Z?

How would my 3040 with a 1.06 rear housing compare to a 3582 with a 0.82 in hp rating and response?

I can handle another 500rpm of lag if it means the possibility of making my power goals.

Edited by boostn32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...