Jump to content
SAU Community

Parking At Tafe

08yannch

By 08yannch,
in WA Wasteland

 Share

Recommended Posts

08yannch Rising Star

08yannch

Posted
Posted

hi im just would like to know can tafe staff give ppl parking fines for parking in the staff parking area?

its because i was given a warning threateningme with a fine and it would be nice to know if there full of shit

i dont normaly park there only for energences like when i dont have time to walk 20min from were i normaly park

Link to comment
Share on other sites
08yannch Rising Star

08yannch

Posted
  • Author
Posted

yer i think 7 news is going 2 be doing a story about how some people are not able to give fines

im going to keep my eyes out

*note, i dont normaly watch tv news just because how retaret it normaly is. like the juce you buy in the shops is not fresh omfg realy who would have guessed :D

Link to comment
Share on other sites
  • 3 weeks later...
luce Explorer

luce

Posted
Posted
its because i was given a warning threateningme with a fine and it would be nice to know if there full of shit

Their threat probably meant that they would contact the correct authorities to give you the fine, not that they personally would give you one.

Link to comment
Share on other sites
C00TS Contributor

C00TS

Posted
Posted

Yeh I have had 2 warnings they can't actually fine you because the carparks are not owned by the council that's what my tafe lecturer said that there all just greedy bastards that want eleventy billion parking spaces for there excels,daewoos and P.O.S 80s HSVs hahahaha

Link to comment
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • D.phantom
      R32 non hicas power steering solenoid issues!

      By D.phantom · Posted

      So I’m having issues with my power steering. the obvious heavy and light and comes on and off randomly now it’s constantly heavy. I’ve read through forums regarding this issue and what I’ve gather is that it’s referring to hicas deletion. That’s the problem mine didn’t come with hicas.    I’ve rebuilt the steering rack, pump, changed the bent hardline on the rack and taken out the solenoid to clean and loosen up the actuator, applied 12v to get it moving. Roughly checked the loom to see if there’s any damage to the loom and nothing. Now I’m checking the wiring. I’ve tested the wiring to the solenoid and it’s fluctuating between 0.07v to 0.03v. Does anyone know what it’s supposed to be reading? 5v? Anyone one know how this all works? Is there a fuse in between? What else is it connected to? How does it connect to the speed sensor? A resistor fried in the ecu? Please help. It’s been years Thanks in advance 
    • niZmO_Man
      Chips/Dents in wheels

      By niZmO_Man · Posted

      that's pretty good condition, those chips are nothing. Get a mobile repairer to sort it out. Nice wheels, I had white 17's on my GT-R once, looked nice.
    • Peekz
      Stolen white R33 GTST brisbane

      By Peekz · Posted

      Found a car that has kiki desing wheels on it with diffrent plates that match a 2008 model when clearly it's not white  
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Howdy friends, So this evening I had a need to remove the rear compressor turbo pipe (long story, but I'm replacing it due to a bolt snapping off in the pipe and managing to then snap an extraction bit in the broken bolt, fun times -_-). The rear bolt is a bit of a bastard and very little room to get good leverage. I was able to get a 12 mm socket onto the bolt head, but none of my ratchets were able to fit, so I put together a "stubby" socket wrench to get it out and it worked surprisingly well 🙂. In the past I've "made" tools by cutting down spanners and bending them with a torch etc, but this 3D printed wrench was way less effort. I'll be keeping this one in my "special tool draw" from now on for sure ^_^b https://www.printables.com/model/868973-half-inch-stubby-socket-wrench
    • r32-25t
      R32 Gtr Long Term Love, Now Project

      By r32-25t · Posted

      It looks even better in Person 
×
×
  • Create New...