Jump to content
SAU Community

Recommended Posts

Can you buy whatever bushes or bearings are within the top eye of the front "swan neck" suspension uprights on an R33 GTS-t? Mine have play in them. The pert I need the bushes for is circled in the parts illustration below. Thanks.

suspension.jpg

Whiteline KCA348. These will also let you adjust your camber.

You may need a press to get the old bushes out - I haven't looked at the fronts but the rear contol arms certainly do.

I have gone with Nismo bushes, but my old press is leaking again and I really need something bigger, so I have bought a 50 tonne unit off Ebay I hope to pick up tomorrow. I will photo the job if you want. I am slightly spoilt in having a lathe and Bridgeport mill that allows me to make mandrels fairly easily, but looking at the bushes I would think a big vice would press them in OK.

Edited by Chris Wilson

mate i did mine with a screw driver, hammer and pliers. then some large washers to press em back in.

you can get the bushes from whiteline (im sure they can ship to the uk). www.whiteline.com.au

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...