Jump to content
SAU Community

Recommended Posts

Anyone know how to run aircon diagnostics?

I have R32 skyline, and the aircon keeps turning itself off all the time. I have had it checked and was told everything is now fine except it stops blowing cool air for a while. The auto-electrician couldn't find out why, and said he had another one that does the same thing.

Any help anyone can give me will be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/
Share on other sites

Its a while since I've done this, so here goes:

Turn ignition to ON.

Hold down the (A/c) OFF button for about 5 sec. I think it starts having a 'flash' attack.

Use HOT / COLD buttons to move through the various diagnostic tests that it carries out.

Any errors will be flashed as a number after its all over.

Turn off ignition to cancel diagnostics.

Advice - make sure you park the car in full sunlight to avoid error 26 (sunlight sensor).

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-56834
Share on other sites

Compressor is now fine...did have aproblem but it is now sorted. The problem I now have is ever five minutes or so the a/c blows outside air in, not cooling it.

Auto electrician said it is most likely a sensor somewhere not working properly, and if i can find out how to do diagnostics it may help.

Thanks a lot blind_elk, will give it a go tomorrow, in the sunlight. Do you know what the different numbers mean?

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-57258
Share on other sites

NIZ30,

Should be getting word from my importer any day now!!,then I'll have a GTR front cut!!(but before they could send it but it fell off the forklift:mad: ,landed on the gearbox and nearly broke in two!)

Sure next time I see you in the centre parking, Ill stop to have a chat!!

MEGA

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-59290
Share on other sites

You should go out to the next meet at Benarby.

A class specificly for imports and 4's.

Should be real good, i hear people from bundy & rocky coming just because of that.

If i have a fourth gear by then i will come back for this. You should get decent times, 4wd and all.

Who's your importer?

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-59299
Share on other sites

Aria jap are the guys importing the front cut for me there in sydney!(couple of jap guys that don't talk much english though)

Yeah I could go but with no manual and turbo lag I would only get a high 15, so why bother to go if you only get laughed at!!!

By the way I crashed the R6(blue motorbike) two weeks ago!!! lucky to be alive today because I landed on my head after collecting a trailer!!(shh probably over 110ish impact speed)will lose licence though!! Not injured though! back at work the next day!!

MEGA

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-59309
Share on other sites

This must be the thread?

http://forums.skylinesaustralia.com/showth...highlight=garth

Thanks NIZ30 I will give him a call next time I need something!! I actually heard that there was a importer in Rocky but didn't know how to get in contact with them!

MEGA

:( :whip: :lol:

Link to comment
https://www.sau.com.au/forums/topic/3365-aircon-diagnostics/#findComment-60780
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...