Jump to content
SAU Community

Recommended Posts

Got some aftermarket performance parts removed from a R33 GTST. All top of the range high quality parts. The prices are fairly firm.

1. Nismo / Rays LM GT2 Wheels. 18"X8" Fronts & 18"X9" Rears GTST Offset. Excellent condition, gunmetal grey centres. One wheel is missing 1 allen key bolt.

Tyres: Fronts - Goldenbridge GB700 235/40/R18 in as new condition. Rears - Nankang Ultra Sport NS-11 265/35/R18 @ 50% tread. - $1800

http://i160.photobucket.com/albums/t177/Sh...00/100_1121.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1117.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1111.jpg

2. A'PEXi Power FC with Hand controller & boost controller kit to suit RB25DET - Wont Seperate - $1500

http://i160.photobucket.com/albums/t177/Sh...00/100_1152.jpg

3. Garrett GT35R Turbo + Ceramic Coating, HKS Cast Low Mount Manifold + Ceramic Coating, Manifold Heatshield, Braided oil & Water lines with fittings, TiAL 44mm Wastegate, Dump/Front Pipe & O2 Sensor, Piping with GTR BOV, A’pexi POD filter and Z32 Air Flow meter & wiring harness.

Set-up was installed on a RB25/30DET so will be direct fitment onto another 25/30 or will need an adjustment made to the Dump/front pipe on a standard RB25.

Turbo - Front housing .60AR Rear housing .82AR. - Won't Seperat - Whole Package $2500.

http://i160.photobucket.com/albums/t177/Sh...00/100_1169.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1176.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1172.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1183.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1186.jpg

4. Genuine Greddy Forward Facing Inlet Plenum, Greddy Throttle body adaptor, RB25DET Throttle body, Piping, Alloy windscreen washer bottle and longer Throttle cable - Won't seperate - $1000

http://i160.photobucket.com/albums/t177/Sh...00/100_1208.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1212.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1211.jpg

5. Nismo Fuel Pump - $250

http://i160.photobucket.com/albums/t177/Sh...00/100_1188.jpg

6. D1 Front Mount Polished Intercooler & Immediate Piping - $300

http://i160.photobucket.com/albums/t177/Sh...00/100_1161.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1164.jpg

7. Splitfire Coilpacks - To suit S2 RB25DET - $350

http://i160.photobucket.com/albums/t177/Sh...00/100_1197.jpg

8. Fujitsubo Catback Exhaust - $250

http://i160.photobucket.com/albums/t177/Sh...00/100_1235.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1244.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1238.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1243.jpg

9. 3" Metal Catco Cat 5" Wide Body - $150

http://i160.photobucket.com/albums/t177/Sh...00/100_1191.jpg

10. Ross Metal Jacket Harmonic Balancer - Will be removed later this week when i get a puller - $400

http://i160.photobucket.com/albums/t177/Sh...00/100_1167.jpg

11. OS Giken STR2CD Twin Plate Clutch - Clutch plates measure at 4.5mm on vernier calipers - $500

http://i160.photobucket.com/albums/t177/Sh...00/100_1103.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1109.jpg

12. Nismo 320km/h Dash Cluster - Showing 31,500K's - $450

http://i160.photobucket.com/albums/t177/Sh...00/100_1146.jpg

13. Works bell steering wheel and boss kit - $150

http://i160.photobucket.com/albums/t177/Sh...00/100_1151.jpg

14. MTX Audio Road Thunder RT404 4 Channel amp with metal mounting plate to bolt to fuel tank opening screws in R33 Rear boot & MTX Sub with box - Sits tight in drivers side of R33 boot - $150

http://i160.photobucket.com/albums/t177/Sh...00/100_1157.jpg

http://i160.photobucket.com/albums/t177/Sh...00/100_1159.jpg

15. A'pexi lightweight front strutbrace - $80

http://i160.photobucket.com/albums/t177/Sh...00/100_1214.jpg

Standard Parts:

16. RB25DET S2 Engine loom - Has had AAC Valve wires extended - $100

17. Alternator - $100

http://i160.photobucket.com/albums/t177/Sh...00/100_1204.jpg

18. Aircon Pump - $80

http://i160.photobucket.com/albums/t177/Sh...00/100_1205.jpg

19. Power Steering Pump - $100

http://i160.photobucket.com/albums/t177/Sh...00/100_1202.jpg

20. AAC Valve - $40

21. Steering Rack - $100

http://i160.photobucket.com/albums/t177/Sh...00/100_1224.jpg

22. Tail Shaft - $100

23. Genuine Skyline Floormats - $80

Will post items that can be sent via Auspost otherwise is Pick-up only from Emerald, Victoria.

Contact me in this thread or through PM. If you have Under 10 posts E-mail me at [email protected].

Link to comment
https://www.sau.com.au/forums/topic/337362-performance-parts-sale-r33/
Share on other sites

hay buddy

wanna sell the gate, turbo, lines and dump pipe only (dont need the rest at all)

pm me if ur keen with a price.

how much power did u make and at what boost bro

hay buddy

wanna sell the gate, turbo, lines and dump pipe only (dont need the rest at all)

pm me if ur keen with a price.

how much power did u make and at what boost bro

Not seperating anything from the package. Cheers

AUD, which is basically the same as CAD at the moment.

hey im interested in ur cat converter have u got any other pics of it cause it looks like the flanges are altinated and not straight so i bit worried might not fit my exhaust

Sent you a PM

got ur pm but i cant pm back yet havent got 10 posts did u weld the flanges on it or did it come with them and what car did the cat come off i just wanna make sure it would fit mine b4 i decide on anythin

got ur pm but i cant pm back yet havent got 10 posts did u weld the flanges on it or did it come with them and what car did the cat come off i just wanna make sure it would fit mine b4 i decide on anythin

PM Sent

SOLD:

Nismo Fuel Pump

Almost got money together for clutch via seapost will get back to u shortly, do not have 10 posts yet but am working on it so I can pm you. 2.6% extra is no prob as well as you need to cover your costs :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...