Jump to content
SAU Community

Fs: R33 Goodies. Stock & Moded

GTScotT
 Share

Recommended Posts

GTScotT Grand Master

GTScotT

Posted
Posted

Hey guys,

A clean up of my last thread. Turbo is sold! So here goes.

* RB25DET - 127xxxKM, cyl 6 slightly less compression than the other 5 on 180. Manifolds included, no injectors or rail. $1000 (have interest already)

* R33 RB25DET 5 Speed Gearbox conversion - 127xxxKM, runs well, car is mostly stock and has not had much abuse. Stock clutch, pedal, lines, etc ra ra ra, all included. $1200 FIRM.

* 700cc Injectors - High flows, just done, flow matched work perfectly. In factory rail with reg $450

* Z32 AFM with plug - Near new bosch item purchased from justjap not long ago $200

* Splitfire S1 coilpacks - $400

* Stock coilpacks in good condition - $100

* Stock R33 crossover pipe with BOV - $80

* Stock R33 intercooler - $80

* R33 alternator $80

* BRAND NEW JJR Stealth FMIC. Fitted and driven back in the garage before my turbo sold. I paid $550 from Just Jap 2 weeks ago. Yours for $480 Firm.

* R33 Engine wiring harness, coilpack and injector harness included. VGC. Unmolested - $150

* HKS mushroom pod filter. Suits RB and Z32 AFMs, bolts into place. - $100

* R33 stock shocks and springs - $100

* R34 stock shocks only - $50

* RSR Ti2000 springs, suit R33/34 (I think R32 also) - $100

More to come as I strip the engine bay. Postage on smaller items, pickup only on larger.

Bankstown area Sydney.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/338255-fs-r33-goodies-stock-moded/
Share on other sites
Bubbafaguchi Enthusiast

Bubbafaguchi

Posted
Posted

* 700cc Injectors - High flows, just done, flow matched work perfectly. In factory rail with reg $450

* Z32 AFM with plug - Near new bosch item purchased from justjap not long ago $200

Are you neg on the above items? and would you do a better deal if purchased together?

Cheers Jason

GTScotT Grand Master

GTScotT

Posted
  • Author
Posted

Injectors and AFM SOLD

Added:

* R32 ecu socketed and remapped for 3037 (3076R), 700cc, Z32 - $150

* R33 RB25DET factory ecu - $100

* Green label RB afm - $100

GTScotT Grand Master

GTScotT

Posted
  • Author
Posted

Gearbox is now $1200 with fork/slave/clutch/flywheel

Pedal box and master will be kept for my conversion.

This price is generous as it is, no more low balls.

Cheers

  • 2 weeks later...
  • 1 month later...
  • 5 weeks later...
GTScotT Grand Master

GTScotT

Posted
  • Author
Posted

Hey guys,

Very sorry for ignoring my thread for so long, possibly best to PM in future.

Geabox is now sold, clutch and flywheel assy still available.

Long motor still available.

Stock shocks and springs in regular old condition, pics available - no obvious leaks or anything and they drove fine.

RSR springs were actually for an R34 and dropped the car to a good height. I have a photo of the front of my car if still interested (with the RSR's fitted)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...