Jump to content
SAU Community

Anyone Want To Respray My Front Bar & Blend My Bonnet & Front Quarter Panels?

Dose Pipe Sutututu

By Dose Pipe Sutututu,
in New South Wales

 Share

Recommended Posts

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Hi Guys,

Anyone here want to help out a SAU brother? I want to sell my car, but I people get turned off my rock chips on the bonnet, front bar and quarter panels...

I bought the car like that, but it never really bothered me from the start. But I want to clean her up and sell her.

Ideally, the front bar will need to be rubbed back, hi-filled, and sprayed. The bonnet & quarters partially rubbed back, sprayed and blended in.

There is no damage, required to be panel beated out. So it's really a straight forward job.

I'm in the Canley Vale area, so anyone nearby would be great.. I don't mind if it's a backyard job, provided it's 2-Pak paint, and little dust (or nothing once rubbed back).

I'm not looking for a show room job, but not a sht job, if you know what I mean? :laugh:

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
  • Author
Posted
If u still need a painter call me 0420314104 I am a tradesman painter

hey mate, thanks for that!

but turns out I just got a deposit on the car.. so good for now :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...