Jump to content
SAU Community

Recommended Posts

Hi guys,

For sale is all you need to begin karting tomorrow (except two items mentioned below). Karting is a great sport, it is fun and exciting, and teaches skills which translate to road driving. On two occasions I have been able to avoid an accident due to locking brakes and car control in the wet because karting taught me the vehicle handling skills required.

Selling due to leaving the sport, move, new car etc etc all demanding cash. These karts, depending on the class, pull 18-30hp in a 90kg kart+driver, which is a lot, considering it can do 2.5G's round corners at 130km/h! Exciting stuff, it really is.

Pics are attached below.

Kart has new clutch, 2 hours since major rebuild (at a cost of $1400) which included a new water fuel pump, recently flushed brake fluid and coolant. It comes with slightly worn mg reds (tyres), excellent for practice AND racing. The exhaust lining, fuel lines and in line filter have just been replaced.

Also for sale, preferably with kart, is a 6x4" Felk galvanised trailer with two spare tyres, registration till late 2011. Comes with useful wooden template for kart, fitted tarp and fastening gear.

I paid well over $12000 for all this gear between 2008 and 2009, and I'm selling it for a just $6000 to get rid of it. It's a loss on new gear you won't need to make!

Everything you need to begin karting tomorrow is the new-regulation airbox from any kart shop ($60), and to trade in the restrictor plate for the newer one. Other than that, an AKA (Australian Karting Association) license and club membership and you're on the track.

In the other pic is the kart as it is, I have to put the wheel and wheel hubs back on it.

In the picture below is:

4 Spare wheel hubs

4 Spare tyres, bridgestones, for use in non-aka events

1 SNELL (Euro standard > Aus standard) spec ERG HJC helmet

1 Bottle of coolant (with some premixed coolant ready)

1 Bottle of fully synthetic rotax engine oil

1 20L jerry can to carry fuel in (with some 98 octane left over)

1 8L oil-fuel mixing bottle with graduations for various oil concentrations

1 Measuring cylinder with graduations for various oil concentrations and volumes in mL

1 Fuel jug (random containers which can hold fuel are infinitely useful when in the pits)

1 Fuel-oil mix funnel

1 Manual fuel pump

1 Near-full spray can of chain lube

1 Near-full bottle of DOT 4 brake fluid

1 Unopened mandatory clutch guard

0.5 metres of fuel line

1 0.8mm t-piece allen key

1 0.6mm t-piece allen key

1 Spare battery

1 Trickle charger for battery

1 AMB transponder

2 Spare chains

1 New 78 tooth sprocket

1 Freem rib protector

1 Pair of Sparco racing boots (size 10)

1 Pair of Kartech gloves (large)

1 Double layer Kartech suit (large)

1 ERG neck protector (large)

1 Tyre pressure gauge

1 Sparco kart stand

2 Chassis adjustment beams

1 Leather seat cover

1 Micron signal generator and receiver

1 Water temp gauge

All clothing and PPE in great condition.

Also shown above is an assortment of useful spare screws, different spacer sizes and 4 jet sizes.

I am in Newcastle and will consider driving for delivery.

PM me.

post-66386-1286339227_thumb.jpg

post-66386-1286339243_thumb.jpg

post-66386-1286339260_thumb.jpg

post-66386-1286339377_thumb.jpg

post-66386-1286339405_thumb.jpg

post-66386-1286339418_thumb.jpg

post-66386-1286339426_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/339401-racing-kart/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

I'm pretty negotiable with it mate, make me an offer (please don't waste time with low balling though :) ).

That said, I spent AT LEAST 10 grand on all the gear and so on that I'm selling for 6k, that's what you get though when you buy new though. It's all still pretty fresh as I only got to the track a few times.

I'll get back to you with a shipping price, but I'm sure we can reach some sort of agreement if you're interested.

Link to comment
https://www.sau.com.au/forums/topic/339401-racing-kart/#findComment-5528263
Share on other sites

Called around to a stack of places who don't seem interested in shipping, one advised it'd be cheaper to just drive it down.

Again, if you're interested I'm sure we can come to some arrangement.

Cheers,

Ben

Link to comment
https://www.sau.com.au/forums/topic/339401-racing-kart/#findComment-5528313
Share on other sites

Bump, pretty negotiable on prices.

I'll get the energy soon to take it to the track so people can see/inspect/hopefully buy. I'd rather sell it to an sau-er though, will sell for a lower price on here too :(

Link to comment
https://www.sau.com.au/forums/topic/339401-racing-kart/#findComment-5537442
Share on other sites

  • 2 weeks later...

Waiting for msging to come back to the forums so I can reply to a couple of PM's (including one from a while back, sorry mate). Feel free to call on 0422 215 127 or email [email protected]

Link to comment
https://www.sau.com.au/forums/topic/339401-racing-kart/#findComment-5589429
Share on other sites

  • 4 weeks later...
  • 4 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 1 month later...

Trailer has just been sold.

Still selling the helmet, Kartech suit, ERG neck protector, Freem rib protector, AMB transponder and Bridgestone tyres. They're up on ebay at the moment.

Not sure if I can post links but a quick search should reveal them (PM me if not and I'll send you a link).

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/339401-racing-kart/#findComment-5842957
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...