Jump to content
SAU Community

Recommended Posts

hey peeeps

For sumreason in the last month my speakers in my R32 have become distorted its really anoying and i dont wanna wanna spend money to get it fixed when i could do it myself if sum1 could help that would be great??

cheers

at all volume levels ? or random?

what brand of speaker?

how much power ? run off the deck or amp?

do they do it cold and hot after running a little while?

fronts or rears?

any music or talk radio as well ?

if you can record a few seconds of it on a phone or ? and post it up it might help troubleshoot a lot..as you can see we need more info before pointing you in the right direction.

cheers

at all volume levels ? or random?

what brand of speaker?

how much power ? run off the deck or amp?

do they do it cold and hot after running a little while

fronts or rears?

any music or talk radio as well ?

if you can record a few seconds of it on a phone or ? and post it up it might help troubleshoot a lot..as you can see we need more info before pointing you in the right direction.

cheers

hey mate it happens 2 CDs And radio it's all the speakers .they are stock skyline speakers and sumtimes a loose volumein the back but il have slight sound in the front. I'f I hit a bump in the road it sumtimes fixes but not for long ? Il try record it if this dosnt help.

Cheers mate

hey mate it happens 2 CDs And radio it's all the speakers .they are stock skyline speakers and sumtimes a loose volumein the back but il have slight sound in the front. I'f I hit a bump in the road it sumtimes fixes but not for long ? Il try record it if this dosnt help.

Cheers mate

is it distortion(music that sounds funny/muddy/popping)

or static electricity sounds/whine

type of deck ? stock or after market ?

if it has a old type rotary volume knob it can be a problem if the car was smoked in or driven in lots of dust

amps ?

sound more like a bad wiring/circuit board if a bump in the road fixes it

have you faded the speaker to each one separate and tested to be sure its not just one speaker your hearing ?

more info please

Hey

ok I have a pioneer deck Stock speakers. ATM I only have sound at the front. while I'm driving the back spearkers make disorted noise like crackling.I think there's a loose conection sumwhere. It's disorted when u turn the volume up too ??

Hey

ok I have a pioneer deck Stock speakers. ATM I only have sound at the front. while I'm driving the back spearkers make disorted noise like crackling.I think there's a loose conection sumwhere. It's disorted when u turn the volume up too ??

first guess - look at the speakers in the boot up close, baby bolts hitting the wires, loose speaker wires hitting the metal of the car from rear speakers area(aftermarket decks don't like using the car body for the ground on the speaker wires too many OHMS..lol), tinsel leads that go from the speaker connection to the speaker coil touching metal , re-bend carefully.

or simply the factory paper cone speakers are cracked on the cone from being old and in the UV sun all day, if they make a rough sound the voice coils might be fried, you can tell if you carefully push on the cone with even force to move it in and out, if you feel grinding, dirty feel its most likely dead. (OHM meter can tell you as well)

cracked cones, ditch them for some new ones, you don't need to spend a mint to improve over factory..lol

'

next option would be the deck wiring is stuffed , most likely a "tape the wire together" job that has come loose and now shorts out random ?

Edited by sapphiregraphics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...