Jump to content
SAU Community

Recommended Posts

I did a day at Mt Cotton driver training the other week, played on the skid pan etc BUT the day was nearly ruined by the old guy by the gate with his noise meter. One ute was told not to drive and I was warned to keep it quiet as well. The noise levels are a problem here in town but what about QR and the levels there or Willowbank. Does anyone here have a loud car and are there problems taking it to a track these days?

I dont want to organise a weekend outing to Lakeside only to be told to go home cause the car is noisey. Which tracks are noise friendly in SE QLD ?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/339882-noise-restrictions-at-racetracks/
Share on other sites

Lakeside can be pretty tough on noise, as there is a house within a stones throw from the main straight. Lakeside use 3-4 noise meters around the track, with one usually located outside of the timing/control tower. It sits on a post for the track barrier.

Last time I was there, they had 2 noise meters outside the tower. One measuring ambient noise levels (pointing at the ground) and one measuring car noise off the main straight. 1 was also located down the back towards the hairpin.

Having said that, there were 100-ish cars completing.

as far as i know there is no limit at QR.

but lakeside are pretty strict and do enforce the noise limits from what i have seen.

Yup

LAkeside's noise restrictions are ridiculous. When I went there, I talked to the noise meter guy (because I was black flagged in the first session for excessive noise - too much wet fart in the Vtec Honda :D ). The guy told me that there were so many cars going over in each session, it was impossible to black flag them all. Must have been at least 30% of all cars on the day got went over, and some of them were not that noisy at all.

QR is much better - they let the top fuel dragsters run there, so nothing on the track can possibly be any louder. I remember doing an autocross, sitting in my stripped out angry RX2 rally car at the start line, hearing the drag cars running over the noise of my own car. Now THAT's loud!

Yup

LAkeside's noise restrictions are ridiculous. When I went there, I talked to the noise meter guy (because I was black flagged in the first session for excessive noise - too much wet fart in the Vtec Honda :D ). The guy told me that there were so many cars going over in each session, it was impossible to black flag them all. Must have been at least 30% of all cars on the day got went over, and some of them were not that noisy at all.

QR is much better - they let the top fuel dragsters run there, so nothing on the track can possibly be any louder. I remember doing an autocross, sitting in my stripped out angry RX2 rally car at the start line, hearing the drag cars running over the noise of my own car. Now THAT's loud!

QR and willowbank got smart. They built their facilitys under the F1 11 flight path. They will never have an issue there.

you can get noise checked at QR if you ask them. Then you will know if you're right for Lakeside or not. But a mildly tuned R33 GTST should have no problems with noise at Lakeside if it has a sensible exhaust system.

noisey little NA cars screaming their tits off have more trouble with noise than turbo cars.

Edited by hrd-hr30
you can get noise checked at QR if you ask them. Then you will know if you're right for Lakeside or not. But a mildly tuned R33 GTST should have no problems with noise at Lakeside if it has a sensible exhaust system.

noisey little NA cars screaming their tits off have more trouble with noise than turbo cars.

Just be sure you are well under the mark if you get tested at qr.

I have seen several cars given the okay qr only to be told gtfo at lakeside.

My car is borderline and so i wont take it to lakeside until i can get it under by a bit more.

Its all about getting your money first with those buggers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...