Jump to content
SAU Community

Recommended Posts

Power Enterprise Injectors to suit R34 NEO RB25 only. Bought off another forum member and done not even 5000ks, had a few guys email me saying these will not work but I sourced these through Brady at JMS in Adelaide and I have also done my own research.

$500 delivered anywhere in Australia

Pm or 0401 184 069

Giulian

Link to comment
https://www.sau.com.au/forums/topic/339909-pe-injectors-to-suit-r34-neo/
Share on other sites

I bought these ages ago and they have sat since but positive they are 650s. The numbers on the injectors themselves are 1001-87094 and 8H18 and I bought these as when I went to Japanese Motorsport in Adelaide I told the guy I was chasing direct fitment injectors and he put me onto this guy that had these.

About half way down the page on the link below are the PE 650cc High impediance, 2 hole, Yellow injectors, I reckon these are the ones as the bloke said they were around $220 each when he bought them. The nengun listing is TH650A, I dont know what the numbers on the injectors mean but nengun website does not list these numbers, it's probably their stock item number.

http://www.nengun.com/power-enterprise/injectors

Giulian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...